*myagriexpo

Tiller

1 / 2 PagesView full catalog

Tiller

Product catalog summary

Overview of Tiller Motor and Guard:

Bi-directional rotation allows for tilling in both forward and reverse directions.
Features a direct drive Eaton® motor, eliminating the need for chains or belts, thus reducing maintenance and downtime.
The tiller shaft is supported on both ends by 2-inch diameter bearings, minimizing the weight burden on the motor.
The motor is protected on the bottom and sides to guard against rocks and debris.
Equipped with replaceable, heat-treated, dual-edge tines for effective breaking of clumps and hard ground.
Offset design covers tire tracks and enables tilling close to buildings and sidewalks.

Tiller Specifications:

Torque:
- 796 ft./lb. at 2500 PSI
- 955 ft./lb. at 3000 PSI
- 1115 ft./lb. at 3500 PSI
Model Specifications:
- Model TLR54:
  - Working Width: 54 inches
  - Overall Width: 70.2 inches
  - Loader Width Coverage: 68 inches
  - Working Offset: 7 inches
  - Number of Tines: 28
  - Approximate Weight: 900 pounds
- Model TLR72:
  - Working Width: 72 inches
  - Overall Width: 88.5 inches
  - Loader Width Coverage: 80 inches
  - Working Offset: 4 inches
  - Number of Tines: 36
  - Approximate Weight: 1050 pounds
Common Specifications:
- Overall Height: 28 inches
- Overall Depth: 32 inches
- Tilling Depth: 6 inches
- Recommended Flow Rate: 15-25 GPM
- Drum Diameter: 22 inches
- Recommended Loader Capacity: Greater than 1300 pounds

Catalog excerpts

DETAIL OF TILLER MOTOR AND GUARD • i-directional rotation allows tilling going forward or in reverse. B • irect drive Eaton® motor eliminates chains or belts reducing D maintenance and downtime. • iller shaft supported on both ends by 2” diameter bearings T minimizing weight held by the motor. • otor guarded on bottom and sides for added protection against M rocks and debris. • eplaceable, heat-treated, dual edge tines help break through R clumps and tear through hard ground. • ffset to cover tire tracks, and allows the operator to till next to O buildings, sidewalks, etc. Specifications and designs are subject to change without notice.

Open the catalog to page 1

*Distance between center of the quick tach plate and center of the working width (A). Specifications and designs are www.virnigmfg.com | [email protected] | 800.648.2408 2 subject to change without notice.

Open the catalog to page 2

All Virnigmfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list