U-BLADE /TILLER

Product catalog summary

Overview: This document provides specifications and features for landscaping equipment models UBV and TLR, focusing on U-Blades and Tillers.

Specifications:

U-Blade Models: UBV26, UBV30, UBV36
- Inside Blade Diameter: 26" to 36"
- Overall Width: 45.6"
- Height: Varies by model, ranging from 38.0" to 43.5"
- Overall Length: 46.8"
- Approximate Digging Depth: 48.0"*
- Weight: 370 to 390 lbs
- Recommended Loader Capacity: Greater than 1500 lbs
Tiller Models: TLR54, TLR72
- Working Width: 54" and 72"
- Overall Width: 70.5" and 88.5"
- Loader Width Coverage: 68" and 80"
- Overall Height: 28.0"
- Overall Depth: 32.0"
- Tilling Depth: 6.0"
- Working Offset: 7.0"* and 4.0"*
- Drum Diameter: 22.0"
- Number of Tines: 28 and 36
- Recommended Flow Rate: 15-25 GPM
- Weight: 900 to 1050 lbs
- Recommended Loader Capacity: Greater than 1300 lbs

Features:

U-Blade: Dual-point blade design for digging and trenching in both forward and reverse directions. Made from 3/8" thick high-carbon steel.
Tiller: Features aggressive dual-edge tines for operation in forward or reverse, supported by 2" diameter bearings. Includes bolt-on heat-treated tines for maximum strength and a guarded motor on the bottom and sides.

Notes:

Digging depth varies with the size and brand of the machine.
Distance between the center of the quick-tach plate and the center of the working width is specified.

Catalog excerpts

Dual-point blade design for digging and trenching in forward and reverse. 1. CARRY & TRANSPLANT TREES & ROCKS, DIG TRENCHES & BREAK UP COMPACTED SOIL 2. 3/8" THICK HIGH-CARBON STEEL BLADE Inside Blade Diameter(in.) 26.0 30.0 36.0 Height: Overall / Blade, With Sides (in.) 38.0/ 17.5 43.5 / 22.5 41.0/ 19.5 Approximate Digging Depth (in.) 48.0* Recommended Loader Capacity Greaterthan 1500lbs * Digging depth varies with size and brand of machine. TILLER Available widths 54" & 72" 15-25 GPM RECOMMENDED FLOW RATE DIRECT DRIVE Offset design to cover tire tracks and till next to buildings, sidewalks, etc. 1. AGGRESSIVE DUAL-EDGETINES FOR OPERATING IN FORWARD OR REVERSE 2. TILLER SHAFT SUPPORTED BY 2" DIAMETER BEARINGS ON EACH SIDE 3. BOLT-ON HEAT-TREATEDTINES FOR MAX STRENGTH 4. GUARDED MOTOR ON BOTTOM & SIDES Loader Width Coverage, Outside Tire (in.) 68.0 80.0 Recommended Flow Rate (GPM) 15-25 Standard Flow Only Approximate Weight (lbs) 900 1050 Recommended Loader Capacity Greater than 1300 lbs *Distance between the center of the quick-tach plate and center of the working width.

Open the catalog to page 1

All Virnigmfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list