V30 CT Angle Snow Blade

Product catalog summary

Specifications Overview
The V30 CT Angle Snow Blade is designed for loaders with an operating capacity of less than 1000 pounds. The blade height is 21 inches, and the overall weight varies between 385 to 410 pounds depending on the model. The blade is available in two widths: 60 inches and 72 inches.

Blade Features

Poly Edge Option: The blade features a 1-inch by 7 3/4-inch reversible, replaceable, reprocessed UHMW polyethylene edge, allowing for 5 1/4 inches of total wear.
Manual Angle: The design allows the blade to angle +/- 28 degrees in either direction for effective snow windrowing. It includes a trip edge to protect the operator and equipment, with a reversible, replaceable steel cutting edge.
Oscillation: The blade can oscillate side-to-side to maintain constant contact with uneven surfaces.
Quick Tach Shoes Option: Provides a consistent stopping point for compact tractor loader arms and helps keep the blade level. It includes a hydraulic crossover relief valve.
Hydraulic Angle Option: Available with one-cylinder or two-cylinder configurations.

Model Specifications

Models: SBS60-CT and SBS72-CT
Overall Blade Width: 61 inches for SBS60-CT and 73 inches for SBS72-CT
Blade Angle: +/- 28 degrees
Width at Full Angle: 53.8 inches for SBS60-CT and 64.4 inches for SBS72-CT
Blade Oscillation: +/- 4 degrees
Moldboard Thickness: 0.12 inches
Cutting Edge: 5/8 x 6 inches, bolt-on
Cylinder Bore | Stroke: 2.0 | 6.0 inches
Cylinder Pins | Hinge Pins Diameter: 1.0 | 1.25 inches
Approximate Weight: 385 pounds for SBS60-CT and 410 pounds for SBS72-CT

Catalog excerpts

V30 CT Angle Snow Blade 60” • 72” MANUAL ANGLE 385-410LB OVERALL WEIGHT (VARIES BY MODEL) less than LOADER OPERATING CAPACITY > Design allows the blade to angle +/- 28° in either direction to windrow snow. > Trip edge protects operator and equipment. Reversible, replaceable steel cutting edge. > ide-to-side S oscillation allows the blade to maintain constant contact with uneven surfaces. Option: HYDRAULIC ANGLE > ONE-CYLINDER > TWO-CYLINDER Includes hydraulic crossover relief valve. V40 Blade with Two-Cylinder Hyd Angle shown Option: QUICK TACH SHOES Option: Poly Edge > ” x 7 3⁄4” reversible, replaceable, 1 reprocessed UHMW polyethylene allows 5 ¼” of total wear. Specifications and designs are subject to change without notice. > rovides a consistent stopping/ P bottoming point for compact tractor loader arms and helps keep the blade level.

Open the catalog to page 1

Less than 1000 pounds (A) Overall Blade Width (Inches) (B) Blade Height (Inches) (C) Blade Angle (Degrees) (D) Width at Full Angle (Inches) (E) Blade Oscillation (Degrees) Moldboard Thickness (Inches) Cutting Edge (Inches) Cylinder Bore | Stroke (Inches) Cylinder Pins | Hinge Pins Dia (Inches) Approximate Weight1 (Pounds) Recommended Loader Capacity Weight with Steel Edge installed. Specifications and designs are www.virnigmfg.com | [email protected] | 800.648.2408 2 subject to change without notice.

Open the catalog to page 2

All Virnigmfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list