V40 Angle Snow Blade

Product catalog summary

Specifications Overview:
The V40 Angle Snow Blade is designed for efficient snow removal with a reversible, replaceable UHMW polyethylene edge allowing for 5 ¼” of total wear. The blade can angle +/- 28° for effective windrowing of snow and features a trip edge to protect both the operator and equipment. It includes a reversible, replaceable steel cutting edge and side-to-side oscillation for maintaining contact on uneven surfaces.

Options:

Poly Edge: An alternative edge material option.
Quick Tach Shoes: Provides a consistent stopping point for compact tractor loader arms, ensuring the blade remains level. Includes a hydraulic crossover relief valve.
Hydraulic Angle: Available in one-cylinder or two-cylinder configurations.

Model Specifications:

Available models: SBS60-Ut, SBS72-Ut, SBS84-Ut, SBS96-Ut.
Overall blade widths range from 62.0 to 98.0 inches.
Blade height is consistently 25.8 inches across models.
Blade angle is +/- 28 degrees, with a width at full angle ranging from 54.7 to 86.5 inches.
Blade oscillation is +/- 4 degrees.
Moldboard thickness is 0.19 inches, with a cutting edge of 5/8 x 8 inches bolt-on.
Cylinder bore and stroke are 2.0 and 6.0 inches respectively, with cylinder and hinge pins diameters of 1.0 and 1.25 inches.
Approximate weights range from 570 to 725 pounds, depending on the model.
Recommended loader capacity is less than 1500 pounds.

Catalog excerpts

MANUAL ANGLE 570-725LB OVERALL WEIGHT (VARIES BY MODEL) less than LOADER OPERATING CAPACITY > Design allows the blade to angle +/- 28° in either direction to windrow snow. > Trip edge protects operator and equipment. Reversible, replaceable steel cutting edge. > ide-to-side S oscillation allows the blade to maintain constant contact with uneven surfaces. Option: HYDRAULIC ANGLE > ONE-CYLINDER > TWO-CYLINDER Includes hydraulic crossover relief valve. V40 Blade with Two-Cylinder Hyd Angle shown Option: QUICK TACH SHOES Option: Poly Edge > ” x 7 3⁄4” reversible, replaceable, 1 reprocessed UHMW polyethylene allows 5 ¼” of total wear. Specifications and designs are subject to change without notice. > rovides a consistent stopping/ P bottoming point for compact tractor loader arms and helps keep the blade level.

Open the catalog to page 1

(A) Overall Blade Width (Inches) 62.0 (B) Blade Height (Inches) (C) Blade Angle (Degrees) (D) Width at Full Angle (Inches) 54.7 (E) Blade Oscillation (Degrees) Moldboard Thickness (Inches) Cutting Edge (Inches) Cylinder Bore | Stroke (Inches) Cylinder Pins | Hinge Pins Dia (Inches) Approximate Weight* (Pounds) 570 Recommended Loader Capacity *Weight with Steel Edge installed. Less than 1500 pounds Specifications and designs are www.virnigmfg.com | [email protected] | 800.648.2408 2 subject to change without notice.

Open the catalog to page 2

All Virnigmfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list