V50 SKELETON ROCK GRAPPLE

Product catalog summary

Overview: The document provides specifications and features of the V50 Skeleton Rock Grapple, a heavy-duty attachment designed for picking rocks and debris while leaving dirt behind. It highlights the construction, materials, and dimensions of the grapple, emphasizing its durability and efficiency.

Specifications:

The grapple features a two-cylinder independent design with 3-inch tine spacing.
Each tine is made from a single piece of 3/8-inch Grade 80 steel, enhancing rigidity.
It includes a raised ridge (rock dam) and a notch near the tips for securing rocks during operation.
The cylinders have a 2-inch bore and an 8 3/8-inch stroke, with NitroSteel® rods that resist corrosion, dents, and flakes.
Greasable 1 1/4-inch diameter cylinder pins and 1 9/16-inch diameter hinge pins are used.
Teflon® coated bushings provide lubrication at pivot points.

Model Specifications:

Models available: SRGV60, SRGV66, SRGV72, SRGV78, SRGV84.
Overall bucket widths range from 61.0 to 87.5 inches.
Bucket depth is 42.9 inches, and height is 21.5 inches.
Number of tines ranges from 19 to 27, depending on the model.
Space between tines is 2.9 inches, with a thickness of 0.375 inches.
Overall grapple width is 57.4 inches, with an independent grapple width of 21.0 inches.
Height with grapple closed is 27.8 inches, and the jaw opening is 36.1 inches.
Approximate weight ranges from 940 to 1125 pounds.
Recommended loader capacity is greater than 1500 pounds.

Additional Features:

Hoses and couplers from the grapple to the loader are included.
The design and specifications are subject to change without notice.

Catalog excerpts

V50 SKELETON ROCK GRAPPLE • wo-cylinder independent grapple with 3” tine spacing designed to pick rocks and debris T and leave dirt behind. • very tine is constructed from one piece of 3⁄8” Grade 80 steel, from tip to top brace, to add rigidity. E • aised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. R • ” bore, 8 3⁄8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods. 2 • Greasable 1 ¼” diameter cylinder pins and 1 9⁄16” diameter hinge pins. • eflon® coated bushings provide lubrication at all pivot locations. T OPTION: CYLINDER GUARDS • rotect cylinders P from damage. Specifications and designs are subject to change without notice.

Open the catalog to page 1

*Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). • 1-9/16” diameter hinge pins. • 2” bore, 8-3/8” stroke cylinders with 1-1/4” NitroSteel® cylinder rods and 1-1/4” cylinder pins. • Hoses from grapple to loader and couplers included. Specifications and designs are subject to change without notice.

Open the catalog to page 2

All Virnigmfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list