V60 ROOT RAKE GRAPPLE 50.3” grapple jaw opening. 1/2” Grade 80 steel jaw tines. Hard stop for fully open and closed positions preventing excess stress and damage to the cylinders. Open back gives excellent visibility. 1/2” Grade 80 steel rake tines. Teflon® coated bushings provide lubrication at all pivot locations. Series 23 replaceable cast teeth. Cylinder Guards standard. 2 1⁄2ˮ bore, 8 3⁄8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods. Greasable 1 ¼” diameter cylinder pins and 1 9⁄16” diameter hinge pins. Machine specific hydraulic package to completely protect hose routing. Known clearance issue with RRG72 on Takeuchi track loaders and John Deere® G-Series loaders (330G, 331G, 332G, and 333G). Two-cylinder, single jaw grapple for digging, raking, piling and loading debris. Specifications and designs are subject to change without notice.

*Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). • 1-9/16” diameter pivot pin. • 2-1/2” bore, 8-3/8” stroke cylinders with 1-1/2” NitroSteel® cylinder rods and 1-1/4” cylinder pins. • Hoses from grapple to loader and couplers included. Specifications and designs are www.virnigmfg.com | [email protected] | 800.648.2408 subject to change without notice.