V60 SKELETON ROCK GRAPPLE

1 / 2 PagesView full catalog

V60 SKELETON ROCK GRAPPLE

Product catalog summary

Specifications:

The V60 Skeleton Rock Grapple features a two-cylinder independent grapple with approximately 4-inch tine spacing, designed to efficiently pick rocks and debris while leaving dirt behind.
Each tine is made from a single piece of 1/2-inch Grade 80 steel, providing enhanced rigidity.
A raised ridge in the center of the tines, known as a rock dam, and a notch near the tips help secure rocks during digging.
The grapple includes 2-inch bore, 8 3/8-inch stroke cylinders with corrosion-resistant NitroSteel® cylinder rods.
Greasable 1 1/4-inch diameter cylinder pins and 1 9/16-inch diameter hinge pins are used for durability.
Teflon® coated bushings ensure lubrication at all pivot points.
An optional feature includes cylinder guards to protect the cylinders from damage.

Model Specifications:

Models available: HSRGV72, HSRGV78, HSRGV84, HSRGV90.
Overall bucket widths range from 73.5 to 91.5 inches.
Bucket depth is 42.9 inches, and bucket height is 21.5 inches.
The number of tines varies from 17 to 21, depending on the model.
Space between tines ranges from 3.9 to 4.1 inches.
Tine and side plate thickness is 0.5 inches, made from Grade 80 Plate with a minimum yield strength of 80,000 PSI.
Overall grapple width is 57.4 inches, with an independent grapple width of 21 inches.
Height with grapple closed is 27.8 inches, and the grapple jaw opening is 36.1 inches.
Approximate weight ranges from 1080 to 1205 pounds, depending on the model.
Recommended loader capacity is greater than 1800 pounds.

Catalog excerpts

V60 SKELETON ROCK GRAPPLE • wo-cylinder independent grapple with ~4” tine spacing designed to pick rocks and debris T and leave dirt behind. • very tine is constructed from one piece of 1⁄2ˮ Grade 80 steel, from tip to top brace, to add rigidity. E • aised ridge in center of tines (rock dam) and notch near tips secure rocks while digging. R • ” bore, 8 3⁄8” stroke cylinders featuring corrosion, dent and flake resistant NitroSteel® cylinder rods. 2 • Greasable 1 ¼” diameter cylinder pins and 1 9⁄16” diameter hinge pins. • eflon® coated bushings provide lubrication at all pivot locations. T OPTION: CYLINDER GUARDS • rotect cylinders P from damage. Specifications and designs are subject to change without notice.

Open the catalog to page 1

*Tine Material is Grade 80 Plate (80,000 PSI Minimum Yield Strength). • 1-9/16” diameter hinge pins. • 2” bore, 8-3/8” stroke cylinders with 1-1/4” NitroSteel® cylinder rods and 1-1/4” cylinder pins. • Hoses from grapple to loader and couplers included. Specifications and designs are subject to change without notice.

Open the catalog to page 2

All Virnigmfg catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list