V70 TREE DISC MULCHER

Product catalog summary

Overview: The V70 Tree Disc Mulcher 60” is designed for efficient mulching of trees with diameters ranging from 6-8 inches and can remove trees up to 14 inches in diameter. It is equipped with a high-flow piston motor and features a robust design for optimal performance and longevity.

Specifications:

Cut Width: 60 inches
Overall Dimensions: Width 70 inches, Height 40.5 inches, Depth 77.5 inches
Deck Height: 11 inches
Push Bar Height: 40.5 inches
Minimum Cut Height: 2.1 inches
Cutting Capacity: 14 inches in diameter
Number of Teeth: 44 (12 top, 20 bottom, 12 outside)
Disc Thickness: 1.25 inches
Deck Thickness: 0.25 inches (top, side) / 0.375 inches (inside)
Weight: 2710 pounds
Recommended Loader Capacity: Greater than 2800 pounds
Flow Rate: 30-45 GPM (high flow only)
Maximum Operating Pressure: 4200 PSI

Key Features:

Intake Chute Options: Standard and open chute designs to guide trees into the disc efficiently.
Rotatable, Replaceable Teeth: 44 Quadco® four-sided bolt-on teeth for increased wear life.
Direct Drive System: Utilizes a bent-axis piston motor for superior performance.
Fully-Machined Disc: 60-inch disc made from 1 ¼” thick high-strength steel.
Recutter Bar: Includes three deck-mounted teeth to prevent jams and improve mulching.
Heavy-Duty Deck: Constructed with Grade 80 steel for durability.
Bearing and Spindle Protection: Features to prevent spindle seal failure and protect against debris.

Operational Requirements: Requires a high-flow loader with a flow rate of 30-45 GPM. The disc tip speeds range from 11,155 FPM at 30 GPM to 16,730 FPM at 45 GPM.

Catalog excerpts

V70 TREE DISC MULCHER Efficiently mulch 6-8” diameter trees and quickly remove up to 14” diameter trees. EFFECTIVE 03/01/21. ALL INFO SUBJECT TO CHANGE WITHOUT NOTICE.

Open the catalog to page 1

DIRECT DRIVE SYSTEM WITH PISTON MOTOR 30-45gpm HIGH FLOW PISTON MOTOR Premium drive components including bent-axis piston motor provide optimum performance and longevity. HYDRO LEDIIC DO NOT OPERATE MULCHER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER. ROTATABLE, REPLACEABLE TEETH 44 Quadco® four-sided bolt-on teeth can be rotated and replaced to increase wear life. Bolt-on tooth mounts also replaceable. FULLY-MACHINED DISC 60" disc contains no welds and is made with 1 14" thick, high-strength steel. > Tapered design helps guide trees into the disc. > Bottom edge drops below bottom of disc to scoop...

Open the catalog to page 2

V70 TREE DISC MULCHER

V70 TREE DISC MULCHER

Catalog excerpts

All Virnigmfg catalogs and technical brochures