eSOW Seed Drills
7Pages

Shallow cultivation and sow, together or separately, with a single equipment your farming equipment

eSOW Drills The concept was born due to the necessity of cost-efficient solutions for preparation and seeding tasks, in one machine. That is why a really original system for the rear roller has been designed. In this way the disc preparator can be loaded without interference on the seeding line. The design of the seeding line, makes it so that this has no problems with superficial residues, allows the opening of the progressive of furrows at the required depth to offer a high-speed performance. The seed is placed between the two areas compacted by the roller, which ensures the ideal...

Compact Disc Harrow or Seed Drill, You Choose... Drill & BioDrill Zephyr X MOUNTED 3,00-5,20m Working Width 1KORE Compact Disc Harrow Seed Drill CHOOSE YOUR WORK When it works as “preparation” the seed placement line is in a HIGH POSITION and makes a longitudinal cut and avoid residue from getting stuck between the discs. The compaction in “strips” and the effect “ground against ground” leave an “open” harvested surface and longitudinally consolidated, which significantly increases the rate of absorption and conservation of humidity. When it works as “seed drill” the seed placement line is...

Location Seed Placement Line Precission: Metering system merlin.4 / merlin.2 Smart Control Software eMerlin The area where we deposit the seed is known as "seed placement line” and if the seeding wants to be as good as possible it needs to be homogeneous. This could be a problem as we face areas with different levels of compaction, mainly due to the areas where the tractor has stepped and the sides of the machine. To counteract this effect, we have designed the Knives with individual pressure and depth adjustment, achieving that desired homogeneity. The Depth control is made by two spindles...

Leveling After the intensive work of the disc cultivator the soil can become uneven, mainly derived from the turning and mixing performed by the discs. For this purpose, the Vomer trailed seeddrills can optionally incorporate a leveling bar with leaf springs, with front or intermediate arrangement. The fully hydraulic adjustment ensures dynamic regulation in the field, without having to get off the tractor to make adjustments. FRONT Leaft Spring bar Front bar with interchangeable Leaf-Spring suspended Flat Blades designed for a previus levelling works with hydraulic drive. This type of...

Kharma X • Pneumatic drill • Drill line integrated in packer • Tines with rubber NON-STOP security and free maintenance • 57cm (22”) Disc and maintenance-free hubs • Hydraulic depth control • Elevated front Fan • Radar Speed Sensor • Drawbar or lower link connection • Can works like a Compact Disc Harrow or like a Drill Working Width (m) Transport Width (m) Number of Disc Disc spacing (mm) Disc Diameter (mm) Connection Lower link 2-Points Seed hopper capacity (Its) (option) Feed opening hopper (m) Doble-Acting control devices Despressurized return flow (max 5 bar) Road lighting equipment...

HIGH PERFORMANCE FARMING EQUIPMENTS Engineered & Factory in León (Spain) phone +34.987.033.368 This document is for informational purposes, Vomer reserves the right to make changes to its designs, specifications or products without notice. Total or partial reproduction of the content is prohibited without authorization from the owner. The values calculated on equipment with original parts and maintenance in official dealer, does not ensure that they are met in all conditions. Vomer is a registered trademark. Leafter design by DGC for Vomer. Printed in León (Spain)