Humidcon-s
2Pages

Catalog excerpts

Humidcon-sHumidity controller The Humidcon-s can control the humidity in a building by activating a misting system and fans. The 'on' and cycle time of the valves in the misting system can be set accurately using the programmable timer. If no humidity sensor is connected, the fans continue to run and the valves in the misting system are activated continuously, in accordance with the preset 'on' and cycle time. If a humidity sensor has been connected, the relative humidity can be read off and set. When the reading is too low, the Humidcon-s regulates the relative humidity by activating the misting valves in cycles, in accordance with the preset value. If the humidity climbs above the set value, the misting valves are disactivated and the fan continues to run for one hour. Advantages • Controls humidity simply • Accurate misting system Characteristics • Simple humidity control through a programmable timer for misting activation • When used with humidity sensor: automatic humidity control based on preset values (relative humidity (RH), 'on' and cycle time). • Fan (for recirculation) is activated automatically

Open the catalog to page 1

Specification Humidcon-s Definitie Type of controller Supply voltage Nominal current consumption Supply voltage frequency Fan motorrelay: maximum current Misting valverelay: maximum current Misting valve timer: Cycle time (t-cycle) Valve open- ON time (t-open) Setting range relative humidity Read-out relative humidity Input signal input humidity sensor Supply voltage humidity sensor Housing Weight (unpacked) Dimensions (B x H x D) Operating temperature Storage temperature Comments Humidity controller Setting range 110V / 230V Control diagram Fan motor Misting valves Valve open Misting...

Open the catalog to page 2