Slicing filter
12Pages

Vredo Slicing Filters Manure Separators Biogas Plants Quality Pays Dividends

IN-HOUSE DEVELOPMENT Vredo is a leading manufacturer of agricultural equipment. Vredo’s regular production produces mainly four product lines: Overseeders, Slicing Filters, Slurry Injectors and Self-Propelled Vehicles. All these product lines are developed and produced fully in-house. To this end, Vredo is equipped with state of the art production equipment. Vredo sells and distributes her products directly and through a carefully selected distribution network both nationally and internationally. The beginnings of the company go back to 1947. At that time Mr. B de Vree, a farmer’s son,...

SLICING FILTER MODELS 5 LOW REQUIRED INPUT POWER PUMP ACTION EXCELLENT FLOW RATE CONTACTLESS SLICING MINIMAL WEAR AND TEAR

EFFICIENT AND EFFECTIVE The Vredo inline slicing filters play an important role in increasing the efficiency of your installation to separate out heavy parts, slicing silage and plant residues. This makes the flow more homogeneous and ensures a more efficient use of your installation. Step 1: The inline slicing filter is installed inline with the flow. Because the slicing rotor rotates in the same direction as the fluid the filter itself creates a pump effect which increase the throughput. Step 2: The filter housing contains the slicing rotor and counter block as well as ample room for a...

SLICING FILTER MODELS FT 6200 • Hydraulically driven • Max. 12.000 ltr/min • 10” connector • Mechanical waste removal FT 4200 • Electrically driven • Hydraulically driven • Max. 6.000 ltr/min • 8” connectot • Manual hatch opening FT 5200 • Hydraulically driven • Max. 10.000 ltr/min • 8” connector • mechanical waste removal FT 3200 • Electrically driven • Hydraulically driven • Max. 4.000 ltr/min • 6” connector • Manual hatch opening FT 2200 • Electrically driven • Hydraulically driven • Max. 2.000

SIMPLICITY IS THE KEY HOUSING: The filter housing is made from hot dip galvanized steel to ensure a long lifespan and is at the same time storage area for the non-sliceable parts. For periodically emptying the storage area a cleaning hatch is part of the filter. It can be opened manually as well as hydraulically. SLICING ROTOR: The slicing rotor in combination with the counter block creates a slicing movement which draws the material in. Thanks to this this unique concept the cutting operation is much improved and reduces system blockages. The slicing rotor is manufacured from hardened...

BIOGAS APPLICATION Biogas typically refers to a gas produced by the breakdown of organic matter in the absence of oxygen. Biogas is produced by anaerobic digestion with anaerobic bacteria or fermentation of biodegradable materials such as manure, sewage, municipal waste, green waste, plant material, and crops. Biogas comprises primarily of methane and carbon dioxide . The residual product of a biogas plant is digestate, which is a fluid containing much nutrients. At most biogas plants the methane produces is used for electrical power. Vredo inline slicing filter for biogas plants When a...

SEPARATOR APPLICATION A strategic choice A way to meet the increasing emission standards and prevent possible expensive discharge cost is to separate slurry into stackable solid fraction and liquid fraction. Manure separation is therefore a strategic choice. It enables you to be more efficient with your slurry. The Vredo inline slicing filter slices silage and separate out stones and such like into the storage area which can be cleaned via the cleaning hatch. By using the Vredo slicing filter in your separator installation failure and down-time will be prevented.

SLURRYTANKERS APPLICATION Proved in the real world For years the Vredo inline Slicing Filter has been used on self-propelled vehicles and slurry tankers. In these mobile application, the Vredo slicing filter has repeatedly proven itself. The Vredo Slicing Filter protects the pump against excessive wear and tear and prevents obstruction of the slurry distributor. This means increased capacity and less down-time. The Vredo inline slicing filter raises the comfort perception in the field, because there is hardly any possibility for blockages to be cleared. Therefore don’t take any risks:...

DIMENSIONS – ELECTRIC MODELS SIDE VIEW REAR VIEW Dimensions in mm unless otherwise stated * FT2200 has no 2nd outlet on the sid

DIMENSIONS – HYDRAULIC MODELS TOP VIEW SIDE VIEW REAR VIEW Dimensions in mm unless otherwise stated * Divergent dimension ** Side has 8” connector

SPECIFICATIONS Model Type Underneath/ rear Rotor revolutions N/min Cleaning Method Door opening Motor Location Nom. power Outlet Connection size Position Underneath/ Underneath/ Underneath/ Underneath/ rear rear rear rear Vredo Dodewaard BV reserves the right to change specification and design of products described in this literature without notice. * Available on request Vredo Dodewaard BV Welysestraat 25a 6669 DJ DODEWAARD The Netherlands T: +31 488 411254 E: info@vredo.nl W: www.vredo.com Copyright © 2013 Vredo Dodewaard BV. All rights reserved. All product information is correct at time...