200-400 SERIES
66Pages

HARVESTING/PROCESSING HEADS AFTERMARKET CATALOG North America

Dear Valued Customer, Waratah has always focused on customers, quality, and high-performing machines. Optimized productivity is not only the result of high-quality machines, service, and replacement parts; high-quality consumables and equipment accessories are equally as important to the success of our customers. We realize it’s not always easy for you to determine the best solutions for every condition and application, so we’ve put this catalog together to help ease your purchasing decisions. The catalog includes the majority of available Waratah wear items, consumables, and accessories...

CUTTING SYSTEM COMPONENTS AND ACCESSORIES From the wide selection of saw bars, chains, and accessories, you will always find the right tools for the job.

All bars in the saw-bar selection are designed for 2-mm (0.404 in.) saw chains. Waratah Saw Bars Waratah Saw Bars, 15-mm tail slot DRIVE SPROCKET TOOTH COUNT PART NUMBER Stump treatment Waratah Saw Bars, 15–mm tail slot DRIVE SPROCKET TOOTH COUNT PART NUMBER

STANDARD SAW BARS All bars in the saw-bar selection are designed for 2-mm/0.404 in. saw chains. Please notice that mounting of the bar is defind by the drive sprocket size. Standard saw bar, 10-mm tail slot DRIVE SPROCKET TOOTH COUNT PART NUMBER Standard saw bar, 15-mm tail slot LENGTH DRIVE SPROCKET TOOTH COUNT Blue Line Blue Line Blue Line PART NUMBER John Deere SpeedMax™, 15-mm tail slot PART NUMBER DRIVE SPROCKET TOOTH COUNT NOTE SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit SpeedMax, JetFit

SAW BARS All bars in the saw-bar selection are designed for 2-mm (0.404 in.) saw chains. Stump treatment bars PART NUMBER F697317 DRIVE SPROCKET TOOTH COUNT NOTE Stump Treatment Bars John Deere SpeedMax™, Stump treatment bars, 15-mm tail slot PART NUMBER DRIVE SPROCKET TOOTH COUNT NOTE SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar SpeedMax, JetFit, Stump treatment bar...

SAW CHAINS All chains are 2-mm (0.404 in.) harvester chains. PART NUMBER • Micro Chisel cutter, excellent performance, resistance to wear and ease of sharpening • Blued cutters provide superior corrosion resistance • Lubri-Tec™ tie-straps help keep the oil on the saw chain where it’s needed We recommend not to use saw chain that: • Has broken and been repaired twice. • Is severely damaged. • Has excessive saw-chain stretch. • Has broken or cracked components. • Has loose rivet joints. If you can rotate the rivets with your fingers, they’re too loose. Tips: • To maintain optimal performance,...

SAW CHAINS All chains are 2-mm (0.404 in.) harvester chains. • Designed for the latest high-flow, high-power harvester heads and saw motors resulting in increased cutting speed. • Blued cutters provide superior corrosion resistance • Lubri-Tec™ tie-straps help keep the oil on the saw chain where it’s needed PART NUMBER Tie strap chain link 19HX, 25 pack Pre-set tie strap chain link 19HX W.rivets, 25 pack • The premium saw chain option • Tall chamfer chisel cutters improve chip clearance – delivering faster and more consistent cuts in timber of all sizes • All chain components are thicker or...

SAW BARS AND CHAINS SELECTION GUIDE, SUPERCUT 100 WARATAH HARVESTER HEAD SAW MOTOR SPROCKET CODE DRIVE SPROCKET TOOTH COUNT *) Factory delivery

SAW BARS AND CHAINS SELECTION GUIDE, SUPERCUT 100S CHAIN LINK SPROCKET CODE DRIVE SPROCKET TOOTH COUNT HARVESTER HEAD *) Factory delivery

WARATAH SAW BAR SELECTION GUIDE, SUPER CUT 100S CHAIN LINK SPROCKET CODE DRIVE SPROCKET TOOTH COUNT HARVESTER HEAD *) Factory delivery

Drive sprockets DESCRIPTION TOOTH COUNT PART NUMBER Nose sprockets PART NUMBER 2-mm (0.404 in.) harvester bar nose sprocket B-type sprocket is used with saw motor with 20 mm axle like motor F055531, used for example in H742 and H732 harvester heads. Inspecting the drive sprocket • A heavily worn drive sprocket can cause problems with the saw bar. When the harvester chain is changed, inspect the drive sprocket and replace it if necessary. It is recommended to change the sprocket after every 10th saw-chain loop. • Align the drive sprocket with the bar groove. Use of F693249 or F703803 gauge...

Chain Stretch Gauge Tools PART NUMBER Plastic, gauge for saw bars, chains, and sprockets Metal, gauge for saw bars, chains, and sprockets Rails dresser for daily bar maintenance Spare files for rail dresser 6 spare files in pack Bar Straightener, only with F693249 Grinding Wheel Dress Gauge

PART NUMBER Chain-shot guard Chain-shot guard Chain catcher Chain catcher Chain-Shot Guard, Chain Catcher, SuperCut 100 PART NUMBER Chain-shot guard Chain catcher Chain catcher Chain-Shot Guard, Chain Catcher, SuperCut 100S Saw chain allowble spindle rpm SAW MOTOR Recommended and Maximum .404” saw chain speed is 40 m/s (8000 ft/min) that is met with the drive shaft speed on the table above. Contact your local Waratah dealer for adjusting saw motor speed. WARNING! There is a risk of serious injury or death to the machine operator, ground personnel, and bystanders from chain-shot. Chain-shot...

Saw Chain Lubricants and Color-Marking Fluids 3MARK PG – PREMIUM COLOR MARKING FLUIDS Waratah offers John Deere’s 3Mark Eco Premium color-marking fluids are 100-percent biodegradable and suitable for year-round use. They leave a very strong mark without permeating into the wood. The color is not water soluble after marking. DESCRIPTION ADDITIONAL INFO PART NUMBER

Feed Rollers FEED ROLLERS

FEED ROLLERS Feed Rollers Selecting the correct feed roller for your application With the wide range of feed rollers available from Waratah, you can always find the right one for your application, no matter the tree species being processed or the operating conditions. Using the right feed roller increases productivity, decreases fuel consumption, and maintains the quality of the harvested trees. So, it’s important to choose the right feed roller for the working conditions and the types of trees being felled. The condition of the feed roller is a critical matter. Roller spikes, hydraulic...