CABRIO WITH LIFT: 100% FULLY AUTOMATIC FEEDING - FROM THE CLAMP TO THE ANIMALS Combining the CABRIO clamp cover system with the LIFT silage extractor system is particularly efficient and, together with the SHUTTLE ECO feeding robot, enables 100% automation of the entire feeding process from the clamp to the livestock. With this configuration, the LIFT silage extractor system controls the opening and closing of the tarpaulin on the CABRIO system, which protects the feed from sunlight and rainwater. FULLY AUTOMATIC CLAMP COVER SYSTEM CABRIO OPENS AND CLOSES THE TARPAULIN COVER FULLY AUTOMATICALLY The LIFT system then takes care of extracting the silage from the clamp, also completely automatically. The Lift cuts the feed from the material in the clamp and sends it to a SHUTTLE ECO feeding robot, which brings it directly to the animals. The future-focused complete solution consisting of CABRIO, LIFT and SHUTTLE ECO is operated purely by e-mobile and is characterised by low energy costs. FULLY AUTOMATIC SILAGE EXTRACTOR SYSTEM LIFT CONTROLS THE CABRIO SYSTEM AND EXTRACTS THE SILAGE TO FILL A SHUTTLE ECO FEEDING ROBOT THAT BRINGS THE FEED DIRECTLY TO THE ANIMALS SHUTTLE ECO FEEDING CIRCUIT WASSERBAUER GMBH FEEDING SYSTEMS A-4595 WALDNEUKIRCHEN, GEWERBESTRASSE 1, PHONE: +43 7258 7464, FAX: +43 7258 7464-22, EMAIL: [email protected] WWW.WASSERBAUER.AT FULLY AUTOMATIC CLAMP COVER SYSTEM Covering and uncovering the clamp tarpaulin (hoses filled with water weigh down the tarpaulin) Clamp dimensions Clamp width: up to 14 m / Clamp length: up to 80 m Total weight Frame construction (steel) without tarpaulin approx. 3.000 kg Lasts more than 10 years in practice Water expansion reservoir for filling the hoses, automatic level control, patented antifreeze technology Hand-held radio transmitter Clearance height Clamp wall height plus 1860 mm (frame only without rolled-up tarpaulin) Power supply 24 V PV power supply with storage battery Combination with LIFT silage extractor system

CABRIO FULLY AUTOMATIC CLAMP COVER SYSTEM FULLY AUTOMATIC OPENING AND CLOSING OF THE TARPAULIN COVERING THE CLAMP The Cabrio system is easy to operate using a hand-held radio remote control, so the normally labour-intensive work of pulling back and replacing the tarpaulin over the silage clamp can be carried out by one person on their own. Laborious lugging of weights to keep the tarpaulin in place is a thing of the past. Hoses filled with rain water weigh down the tarpaulin to provide an airtight seal for the silage material. The cut face of the silage remains protected from sunlight and rain...