STOP GATES Waterman Stop Gates can be fitted with either rod handles or a slot grip for hand placing. Guide rails for embedded, flatback or channel mounting are available. These gates are designed for a maximum head of one foot over the slide, unless otherwise specified and are used generally in diversion applications. Options available include "J" Bulb seals for minimum leakage, ultra high molecular weight polyethylene seats for increased ease of operation and special cut outs such as "V" notch or slot openings for water measurement. All frames feature welded construction. Slides are minimum ¼" thick to minimize deflection and contribute to long gate life. Available in an almost unlimited range of sizes and configurations, Waterman stop gates can be manufactured from aluminum, steel, stainless steel or fiberglass. Aluminum Stop Gate

TYPICAL SPECIFICATIONS ALUMINUM STOP GATES Guides The gate frame shall be a rigid, welded unit with a clear opening the same size as the waterway, unless otherwise specified. The guides shall be of structural or stainless steel shapes or aluminum extrusions. The guides will be of the length specified. Additional members will be added to the frame as required for flushbottom closure, spigots, and "J" Bulb seals. Slide The slide shall be plate reinforced with structural shapes welded to the plate. The slide shall not deflect more than 1/360 of the span of the gate under maximum head. Flushbottom...

ALUMINUM STOP GATE EMBEDDED TYPE SURFACE MOUNT TYPE BEARING STRIP ANCHOR BOLT w/NUT FLUSHBOTTOM SEAL NOTE: FOR PRELIMINARY DESIGN PURPOSES ONLY DO NOT USE FOR INSTALLATION UNLESS PART OF CERTIFIED & APPROVED SUBMITTAL