1880 Technical specifications Engine data Standard Manufacturer Engine type Cylinders Engine performance (max.) Cubic capacity Cooling system Emissions standard level Exhaust after treatment Electrical system

Operating voltage Weights Operating weight (standard) Tipping load with bucket - machine straight Tipping load with bucket - machine articulated Tipping load with pallet fork - machine straight Tipping load with pallet fork - machine articulated Vehicle data Axle Cab (optional) Ground speed (optional) Speed stages Fuel tank capacity Hydraulic oil tank capacity Hydraulic system External services - Operating pressure Steering hydraulics - Oil flow (optional) Steering hydraulics - Operating pressure Drive Type of drive Traction drive Hydrostatic Universal joint shaft Noise values Average sound power...

Es wird empfohlen, bei der Berechnung der Vibrationswerte nach ISO/TR 25398:2006, die in der Tabelle angegebenen Werte zu verwenden. Dabei sind die tatsächlichen Einsatzbedingungen zu berücksichtigen. Teleskoplader sind wie Radlader nach Betriebsgewicht einzuordnen. Mittelwert Laderart Typische Betriebsbedingung Load & carry (Lade- und Transportarbeiten) Load & carry (Lade- und Transportarbeiten) Einsatz in der Gewinnung (raue Einsatzbedingungen)

Total length Total length (without bucket) Axle middle to bucket pivot pin Rear overhang Height to top of overhead guard fixed Total working height Height of bucket pivot (max.) Load-over height Dumping height Digging depth Total width Track width

Ground clearance Maximum radius external Radius at the outer edge Inside turning radius Inclination angle Rollback angle at max. lifting height Rollback angle (on the ground)

1880 Standard components Motor Perkins 404 J-E22TA (45 kW / 61 HP), Stage V Drive system PA940 planetary axle Hydrostatic all-wheel drive, travel direction can be selected via joystick Service brake: Hydrostatic drive system acting on all 4 wheels (wear-free) Central service and parking brake in the drive train acting on all 4 wheels 100% differential lock, electric-hydraulically connectable on front and rear axle Tires 10.0 / 75 - 15.3 AS ET-5 Steering system Hydraulic articulated pendulum steering, 12° oscillating angle Hydraulics 3rd control circuit in front electrically proportional in parallel...

Engine pre-heater + hydraulic oil pre-heater 230 V Drive system Hand inching (creep speed controller) Speed increase to 28 km/h Load arm dampening Driver's Cabin Roof lining for operator's canopy Front window complete with wiper 2-door cabin, including heating and ventilation Air-cushioned comfort seat (artificial leather / fabric) Heated seat Air-conditioning system Cabin plug receptacle 230 V Lighting Lighting according to Road Traffic Regulations MEGA working lights (2 front, 2 rear) LED working lights (2 front, 2 rear) Rotating beacon Hydraulics Unpressurised reverse travel (front / rear) 3rd...

Technical Inspection Authority expert's report Automatic trailer coupling Approval as self-propelled work machine with AHK* Official approval for road use Registration plate mounting Fully automatic central lubrication unit Custommade paint finish Hand lever grease gun * Trailer coupling Please note: that product availability can vary from country to country. It is possible that information / products may not be available in your country. More detailed information on engine power can be found in the operator's manual; the stated power may vary due to specific operating conditions. Subject to alterations...