FE1D01-02 Trimmer Description： FE1D01-02 Trimmer is a mechanized pruning equipment developed by Zoomye Company according to the unified preliminary pruning of branches between rows in winter, summer and autumn in modern wide row and dense planting orchards. The whole machine is fully hydraulically driven and controlled, with simple operation and high trimming efficiency! The trimmer is installed at the front of the tractor. The operator can flexibly adjust the trim height, trim angle and side extension width of the trimmer through the electric control or manual control of the hydraulic valve. It is easy and convenient to work!

Product Specification Sheet of FE1D01-02 Trimmer Model Name Main Parameter Scissor height (excluding 3 vehicle height) Transverse width (from the 4 vehicle center) Pruning angle Pruning diameter Driving mode Supporting power Installation method 2600mm+1000mm (Hydraulic cylinder stroke) 820mm+700mm (Hydraulic cylinder stroke) 90 ±20 Hydraulic drive ≥50. (Medium axle tractor) Tractor front mounting 2400mm+500mm( according to the actual Height after installation installation height of the vehicle)+1000mm （hydraulic cylinder stroke) ※Optional： Independent hydraulic system

*The parameter table only describes the basic parameters. Please consult Zoomye Company for high configuration, high power and optional configuration parameters. *The specification parameters and appearance are constantly updated with the development of products. For specific parameters, please consult Zoomye Company. The latest parameters of Zoomye Company shall prevail. The above parameters are not used as the basis for the acceptance of the complete machine. Consulting E-mail:[email protected]