DSP 205
2Pages

DSP 205 Screw Press Solid-liquid separation DSP 205 Screw Press Solid-liquid separation Clean fermentation substrate for the biogas production The Doppstadt Group - well known for its grinders, shredders, screens, etc. - offers a range of innovative solutions for solid-liquid separation as well. The Doppstadt Screw Press DSP 205 is designed for disintegration and separation of packaged biowaste and food waste prior to biogas production. Applications • Processing of bio waste (kitchen waste, green waste, out of date food etc.) • Dewatering of fermentation residues from dry-digestion plants Technology evolved into solution. Doppstadt. The full line supplier for your requirements. Kitchen & catering waste Kitchen waste with high plastic content Market waste Green waste Fermentation residue Weight Length Width Height Standard equipment Additional equipment Special equipment Discharge conveyor 15,000 kg (33069 lb) 9,606 mm (31‘6“) 2,257 mm (7‘5”) 3,652 mm (11‘11”) Screw press unit (fully electric main drive) twin shaft mixing hopper, manure connection or flow nozzles for mixing hopper, filtrate discharge by eccentric screw pump or free outflow, Doppstadt Multicontroller, mounting frame up to a height of 3,000 (9‘10”) mm and an angle between 0 and 30°, special paint Pump and conveyor technology Rear Length x Width x Height 5,000 (16‘4”) x 1,200 (3'TT) x 3,000 (9‘10”) mm Number of Screw shafts one pressing screw, two mixing screws Screw diameter pressing screw: 500 (1‘8”) mm, mixing screws: 480 (1‘7”) mm Mixing hopper Volume 5 m3 Press screw Drive Drive power Drive speed Drive torque Drive gear Drive gear ratio Mixing hopper frequency-controlled three-phase motor 45 kW / 61 hp 14 - 18 rpm 18 - 26 kNm planetary gear box with bevel gear input stage 97.5 Drive frequency-controlled three-phase motor Drive gear spur gear Drive gear ratio 27.8 Press basket Type Opening size Liquid phase TS (depending on feedstock) Plastic contamination in the filtrate (depending on feedstock) tapered round hole or slit screen round hole: 8 mm, 10 mm, 12 mm; slit screen: 2.5 mm about 16 to 23% analyses regarding the content of plastics particles over 2 mm: 0.34 wt% based on dry matter and 0.75 wt% other foreign matter such as glass, sand, and metal As of May 2016 - subject to technical alterations. The specifications are approximate. Illustrations and descriptions may include options that are not part of the standard equipment. Werner Doppstadt Umwelttechnik GmbH & Co. KG Processing of bio & domestic waste in a single pass using Doppstadt’s innovative solution DSP 205 '^-fhredding rM“'red WE CARE

The Doppstadt solution for your application: DSP 205 Biogas production starts with the fermentation substrate FEEDING HOPPER PRESSING SCREW PRESSING SCREENS PRESSING CONE with two counter-conveying mixing screws. Packaging is changeable wear-resistant rotates with the pressing screw opened in the area between the mixing screws by shear cast steel elements application screens with reading of the machine data by round tapered holes or direction by means of hydraulic multifunction display, slit screens are available Remote-control available During processing via DSP 205 the bio-available...