Clipper / De-awnerCW-600 / -800 / -1000 / -1250 / -1500 The CW clipper/de-awner is used for pre-treatment of various grain types; the purpose of the de-awning operation is to remove awns from barley kernels, loose husks from wheat, and to clip oat kernels The clipper/de-awner can be used where heavy de-awning is required but also for products where only a light de-awning is needed. The degree of de-awning depends on the length of time the material takes to pass through the de-awner housing. The adjustable bottom slide gate can increase or decrease the flowtime through the unit. In standard construction, the CW clipper / de-awner is delivered with below features. The unit has inlet with adjustable capacity slide and adjustable bottom slide gate. The housing is fitted with a number of round beaters. The unit has V-belt drive and motor. The machine is in steel construction and mounted on a platform. Special features: ♦ Various kinds of beaters ♦ Wiremesh or teardrop plate inside ♦ Incorporating a buffer bin between clipper/de-awner and cleaner . : •: UJ'IUII- Please contact us for detailed information or meet us at www.westrup.com