The gravity separator type KA is used for fine grading and impurity separation of a number of products with identical particle size but with differences in their respective weights Often this is the only possible method to achieve the purity required and the gravity separator is therefore used where traditional cleaning methods by air, screen, and indented cylinder prove to be less than effective. Estimated capacity on wheat is for KA-1200 up to 1.5 t/h and for KA-1500 up to 2.1 t/h. In standard construction, the KA gravity separators are delivered with the following features. The inlet is adjustable. The oscillating grading deck is with standard covering for grain and adjustable guide plates. Deck change takes place from the side of the machine. The machine is with manually adjustable stroke length, eccentric rpm, air quantity, and deck inclinations (sideways and lengthways. The outlet bench is with square sack clamps. The machine is complete with built-in fan, speed drive, motors, and air filter. The machine is of steel construction with the grading deck of waterproof laminated wood. Special features: ♦ Dust extraction chute at inlet ♦ Dust hood over the complete deck ♦ Hydraulic adjustment with electrical pump for deck inclinations ♦ Programmable hydraulic PLC control, operator panel Please contact us for detailed information or meet us at www.westrup.com