SCREEN CLEANERPC-1000 / -1250 / -1500 The PC screen cleaner is designed for pre-or fine cleaning,, grading, and calibration of a large variety of products For capacity and all other specific information see the back page. The PC screen cleaner offers the below features: ° Inlet with feed roll with counterweight. ° Screen section consisting of one sieveboat with 1 scalping screen layer and 1 sand screen layer; both screen layers with manually adjustable inclination of 4o, 6o, 8o, or 11o. ° In total 4 screen segments with standard perforations above 2 mm; all screen segments with rubber ball cleaning. ° One fixed front outlet and two side outlets, which can be placed on either side of the machine. ° Fixed drive and motor. The machine is of steel construction with sieveboat of waterproof laminated wood. Options: ° Sieveboat covering with aspiration spout ° Sieveboat with 3 end outlets (instead of basic construction]; Set-up 1: scalping outlet right, middle outlet fixed, sand outlet left; Set-up 2: scalping outlet left, middle outlet fixed, sand outlet right We provide valuable insights, so you can make qualified decisions

SCREEN CLEANER PC-1D0D / -1250 / -1500 TECHNICAL SPECIFICATIONS: Pre-cleaning capacity: estimate [guideline] based on wheat with max. moisture content of 18%. Fine cleaning capacity: estimate [guideline] based on pre-dean wheat with max. moisture content of 14%. DISTINGUISHING ADVANTAGES: ° Easy to install ° Screen inclination, which is easy to adjust, to clean a large variety of products ° Easy clean-down when changing from one product to another ° Low maintenance costs