Loading bucket (fork mounted)
28Pages

Manual and safety instructions HOD/HOD-F/HOD-Z/HOD-ZF/HO/HOD-V Hydraulic loading bucket HOD-Z fork mounted HOD-F fork carriage mounted HOD-ZF fork carriage mounted WIFO-Anema B.V. Hegebeintumerdyk 37 – 9172 GP Ferwert – Holland Telefoon  (0031) 518411318 – Telefax  (0031) 518411563 www.wifo.nl – email: info@wi

English Table of contents 1.

The aim of this manual is to inform users about the commissioning, use and maintenance of their new WIFO hydraulic loading bucket. Also included in this manual are a number of safety instructions to create a safe working environment. At WIFO-Anema B.V. we aim to continuously improve our products. WIFO-Anema B.V. reserve the right to introduce any changes and improvements deemed necessary without prior notice. Please read the manual thoroughly and observe the safety procedures before putting the unit into operation. Contact your dealer for any further questions or concerns you may have. We...

Safety precautions and warnings Please read this manual before you put the machine into operation for the first time, and observe the safety instructions at all times. The most important instructions are marked with a symbol. This symbol is used for all important safety instructions throughout this manual. Carefully observe the instructions and be very cautious. This symbol is used for all important actions that should not be carried out under any circumstances. Carefully observe these prohibitions. Any person in charge of the commencement of operation, the operation itself or the...

In order to prevent damage to the cylinder, a standard fork lift truck must not drive forwards, and a tractor fitted with a lifting mast must not reverse, while the loading bucket is in the forward (tipped) position, with the blade of the bucket on the ground. The loading bucket should be tipped back when transporting loads, in order to prevent the load falling out. Loads should be carried with the bucket in the lowest possible position to provide maximum stability to the lifting vehicle. During loading, the bucket must be kept horizontal or tilted a little forwards (max. 15°). Ensure that...

Safety stickers and warning signs A safe working environment also requires personnel to be well-informed about the various safety stickers on the machine. Be aware of the hazards they warn you to look out for. Replace any loose, illegible or missing stickers. Several safety stickers have been put onto the machine. The meaning of the stickers on this machine is as follows: N.B.: Please read the instructions from the manual prior to any maintenance to the machine! Turn off the engine and remove the key from the ignition while maintenance is carried out on the machine! Danger: Always keep at a...

Figure 1.2.3-Location of the safety stickers for fork mounted HOD-Z Figure 1.2.4-Location of the safety stickers for fork carriage mounted HOD-ZF Figure 1.2.5-Location of the safety stickers for fork mounted HO Figure 1.2.6-Location of the safety stickers for HOD-V (telescopic forklift, etc) The special side plates, the rounded sides and the vision gratings make WIFO HO, HOD, HOD-V and HOD-Z hydraulic high visibility loading buckets particularly suitable for loading and transporting products sensitive to damage, such as eating or seed potatoes, onions, flower bulbs etc. NOTE: The capacity...

Any person working with or on the machine must have read this manual. The machine is to be used for its intended purpose only. Included in the intended purpose are, among other things: 1. 2. Work must be carried out in accordance with the directions and within the functional restrictions (e.g. maximum hydraulic working pressure) as outlined in the regulations. Use only sound and appropriate tools. Electric/electronic equipment and accessories (e.g. cables) must be treated in accordance with the general accepted policy for using non-waterproof portable electric and electronic equipment, such...

Tabel 2.1.4-Fork carrier mounted HOD-ZF models

Table 2.1.6-HOD-V telescopic forklift models 1 Point from which the remaining capacity of the forklift truck is calculated, including the load. 2 Forward tipping angle/rearward angle. Attachment options Fork mounted models: - The distance between the forkholder centers is 830mm. For fork carrier mounted models: - FEM II (407 mm)/FEM III (508 mm). For the version used with telescopic forklifts and similar: - A variety of attachment options are available for WIFO loading buckets used with telescopic forklift trucks and similar equipment, depending on the vehicle/loading bucket combination.

2.2.1 Parts list Number Table 2.2.1-Parts list for fork mounted HOD models

2.3 Fork carriage mounted HOD-F 2.3.1 Parts list Number Table 2.3.1-Parts list for fork carriage mounted HOD-F

2.4.1 Parts list Number Table 2.4.1-Parts list for fork mounted HOD-Z

2.5 Fork carriage mounted HOD-ZF 2.5.1 Parts list Number Table 2.5.1-Parts list for fork carriage mounted HOD-ZF

2.6.1 Parts list Number Table 2.6.1-Parts list for fork mounted HO

2.7 HOD-V for telescopic forklift trucks, front loaders, mobile shovels 2.7.1 Parts list Table 2.7.1-Parts list HOD-V

1. Place the forklift truck or lifting mast forks the correct distance apart (830 mm centres) so that the hydraulic bucket is located centrally in front of the vehicle. 2. Drive the vehicle forward and engage the forks as deeply as possible into the bucket's fork holders. 3. Use the securing hook or chain to fix the bucket frame to the forklift truck or lifting mast fork carrier, so that the bucket cannot slip from the forks. 4. With the bucket slightly raised, the bolts must be tightened that they just clear the forklift truck or lifting mast forks. Secure these bolts using the locknuts...

Commissioning of bucket connected to telescopic forklift, front loader or mobile shovel Remove the pins from the quick attachment frame. Tip the quick attachment frame forwards using the tipping cylinders and hook the loading bucket onto the telescopic forklift, front loader or mobile shovel. The hooks must engage between the quick attachment system guide strips. Now tip the quick attachment frame to the rear using the tipping cylinders, and replace the pins with their securing pins, so that the loading bucket is firmly attached. Connect the hydraulic hoses and ensure that the quick...