ORIGINAL STOLL IMPLEMENTS
24Pages

ORIGINAL STOLL IMPLEMENTS FEEL THE DIFFERENCE

OBTAIN ALL THE ADVANTAGES! Load grain, transport bales, move silage, stack pallets, retrieve logs – everything goes with a STOLL front loader. Best with the appropriate implement: whatever the pending task, STOLL always offers the right solution. » Original STOLL implements withstand all tests. They are versatile, robust and powerful. With them, you can exploit the full power of your front loader. Implements must withstand the toughest conditions. This is why STOLL relies on the best material quality and ”German engineering“ in product development. Extensive practical tests guarantee the...

IMPLEMENT HANDLING MADE EASY Attaching the implement – just a quick pit stop Drive up and hook on the front loader Tilt the implement – the locking mechanism engages automatically Implement lock by pressing a button, even more convenient implement changes without leaving the cab – with HYDRO-LOCK. Coupling of the hydraulic connection For an even faster connection of the hydraulic lines,the ToolFix enables the mounting of implemen

• Easy handling for implements with hydraulic functions • The driver requires no further control unit • Needed for work with e.g. silage clamps, bale grippers or bale fork lifts • Genuine third control circuit to operate implements inde- pendent of the front loader control • The hydraulic pump of the tractor feeds oil directly to the • The implement functions can be run simultaneously - so the task is completed faster and more effectively

ALL BUCKETS ARE BUSY The right bucket for every occasion – versatile and strong: ROBUST U – for universal, light to moderate use hardness Cutting edge 500 BRINELL Cutting edge Brinell 500 HB Volume level heap in m3 ROBUST M – especially for the loading of loose bulk materials with low weight CUTTING EDGE Brinell 500 HB Volume level heap in m3 hardness Cutting edge 500 BRINELL ROBUST S – for working with heavy and sticky material, like wet earth or snow CUTTING EDGE Brinell 500 HB hardness Cutting edge 500 BRINELL Volume level heap in m3

ROBUST T – with tines for earth moving, demolition and digging CUTTING EDGE Brinell 500 HB Volume level heap in m3 hardness Cutting edge 500 BRINELL Combined levelling and grabbing bucket (4-in-1) – four functions at once: shovelling, grabbing, levelling, rapid emptying Order no. 3rd control circuit required Volume bucket HD (FZ 100 / 80.1 / 60 / 60.1) – for the full load, suitable for all applications Volume heaped in m3 Volume level heap in m3 hardness Cutting edge 500 BRINELL Earth bucket HD (FZ 100 / 80.1 / 60 / 60.1) – also perfectly suitable for solid ground Volume heaped in m3 Volume...

Whether in livestock operation or biogas plant - silage is everywhere. • For any work with silage, STOLL has the right implement. • Effective and comfortable - each implement can be controlled easily and precisely. • Our tip: The large grabbing buckets have a huge volume. Especially in biogas plants, they can easily keep up with wheel loaders. Bucket with grapple - the universal implement for silo unloading: thanks to the closed bottom, also wet and/or loose material can be loaded

Round bale cutter – to cut silage bales, without the driver getting off and without an additional implement Order no. Maximum bale width in mm Maximum bale weight in kg 3rd control circuit required Manure fork – for loading manure. The arrangement of the prongs prevents load loss Order no. Bucket with grab – suitable for all kinds of silage: ideal for direct loading and transportation Order no. Corn tine optional (details per set) 3635370 3rd control circuit required / *Does not fit on ROBUST 30.1 / 40.1 Disposer bucket – multi-functional implement, especially for bulky goods Order no. Side...

TO THE BALES, GET SET, GO! Every summer is high season for bales – prepare yourselves in good time: with STOLL bale implements Whether round or square bales, with foil or without: At STOLL Wrapped bale handler – perfectly suitable for foil wrapped round bales: there are no sharp edges that can damage the foil Order no. For round bales Ø from 1,00 m to 1,80 m / for square bales Ø 1,60 m | 3rd control circuit required Wrapped bale handler-Pro H – for the safe handling of round and square bales wrapped with foil Order no. Largest / smallest opening: 2,05 m / 0,65 m | Effective depth: 1,20 m |...

Bale carrier rear H – ideal for transporting round bales Order no. For round bales | Gripping area from 0,82 m to 1,22 m / Beam length 1,28 m / Pipe diameter 0,16 m Maxi bale claw H – simultaneously grab, lift and load up to two bales Order no. For round and square bales | 3rd control circuit required Roll-type bale fork – fits all bale types Order no. For round and square foil wrapped bales / Gripping range from 0,60 m to 1,85 m | 3rd control circuit req

Bale fork lift H – the built-in lifting device brings a height gain of up to 1,40 m Order no. For round and square bales / lifting height gain of 1,40 m to the normal height | 3rd control circuit required Bale spike H – variable tine placing – so the spike suits all bales Order no. Heavy duty tines (per unit) 1330130 Heavy duty tines (per unit) 0476240 For round and square bales | Additional tines can be retrofitted Big bale fork HS – the distance between the tines can be easily changed. Pallet fork tines can also be mounted onto these frames Order no. Frame HS (details per unit) 2400050 For...

EVERYTHING ALRIGHT! Lifting, loading, stacking - with the STOLL pallet forks you always work accurately: • The pallet forks are particularly stable and hardly wear out, because STOLL attaches importance to a robust construction • You can position the tines so that they adapt to your work: the tines can be moved by hand. • The largest pallet fork lifts up to 3,5 t. Thus, it is in the absolute top group in terms of front-loading implements. Pallet fork HD - the forks can be moved freely - the driver can also mount bale tines to the frame