642 Utility

642 Utility

642 Utility

Product catalog summary
Product Overview: The 642 Utility 10' Three-Point Broadcast Hooded Sprayer is designed for efficient and accurate chemical application with minimal spray drift. It features a 10-foot wide tractor-mounted rigid boom and a Gen II hood design that reduces spray drift by up to 90%.
Key Features:
  • Spray nozzles are protected inside the hood to prevent wind disruption.
  • Constant boom height ensures proper herbicide placement.
  • Constructed with high-strength steel and a durable powder coat paint finish.
  • Standard Redball® Spray Monitors for enhanced monitoring.
Specifications:
  • Toolbar Configuration: 10' Fixed Bar
  • Tank Size: 150 Gallon
  • Hood Size: 20" Broadcast Hoods
  • Boom Length: 10'
  • Hitch: Three Point Hitch (category 1 or 2)
  • Spray Boom Plumbing: 1/2" Quick Attach Diaphragm Triple Nozzle Bodies
  • Transport Width: Approximately 12' 4''
  • Shipping Weight: Approximately 850 lbs.
Color Options: Available in Black Powder Coat Paint Finish with Yellow or Grey Hoods and Tank.
Optional Features:
  • Fresh Water Safety Tank: 9 Gallon
  • Pumps: Hypro 4101XL 12 Volt Pump Kit, ACE FMC - 150HYD-206
  • Spray Controller: 12v In-Cab Pressure Adjustable
  • Light Kit: 20' - 50' Standard
Additional Information: The product is patent pending and tested by the University of Nebraska-Lincoln West Central Research and Extension Center in 2013. Always follow label instructions and state and local regulations.
See more

Catalog excerpts

642 Utility-1

*Pictured with options 642 Utility *Pictured with options 10' Three-Point Hitch Broadcast Hooded Sprayer "Put a Hood on Drift.”™ 2205 Hall Ave. | Benson, MN 56215 | Toll Free: 877-332-2551 | Phone: 320-843-1700 | Fax: 320-843-1703 The WF® and Redball® marks and “Put a Hood on Drift”™ are trademarks of Willmar Fabrication, LLC. Always follow label instructions and state and local regulations.

 Open the catalog to page 1
642 Utility-2

Fast Facts □ Includes 10' wide tractor-mounted, rigid boom □ Pump ready with solenoid shut-off, switch box, strainer, manual pressure adjust and pressure gauge ■ Field trials have shown that the Gen II hood design helps limit spray drift up to 90%, allowing for a more consistent and accurate chemical application1 ° Spray nozzles are mounted inside the hood to protect the spray pattern from wind disruption for better coverage ■ Constant boom height for proper herbicide placement □ Frame is constructed of high-strength steel □ Durable powder coat paint finish □ Redball® Spray Monitors come standard Redball®...

 Open the catalog to page 2

All Willmar Fabrication, LLC catalogs and technical brochures

  1. 642E

    2  Pages

  2. RT850

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.