*myagriexpo

RT850

Product catalog summary

Overview: The document describes the RT850 Reservoir Tillage system patented under US Patent No. 9,267,255 B2 by Willmar Fabrication, LLC. This system is designed to create water reservoirs, improve crop yield, reduce pollution, aerate the ground, conserve water and soil, limit runoff, and trap nutrients. It can incorporate both liquid and dry fertilizers.

Specifications:

The RT850 system is available in 1-Tooth, 2-Tooth, and 3-Tooth configurations with 5, 10, and 15 teeth respectively.
Blade length is consistent at 10 inches across all configurations.
Row spacing varies from 22 inches to 40 inches depending on the configuration.
Weights range from 314 lbs. for the 1-Tooth unit to 684 lbs. for the 3-Tooth unit.
Width varies from 8 inches to 19 inches.

Features:

The system uses abrasion-resistant and austempered ductile iron blades that are replaceable and pitched left and right.
Blades are set on 5.5-inch spacing with independent suspension.
Sand can be added for additional weight and increased down pressure.
Multiple row unit sizes can be mounted to a bar to customize tillage requirements.
The design is simple and robust with minimal moving parts, allowing 16 inches of travel (10 inches up, 6 inches down from the operating position).

Toolbar Configurations:

Available in 6 to 16 row configurations.
Compatible with Category 3 or 4 Three-Point Hitch and mounts to a 7'' x 7'' bar.
Capable of rolling out of the ground if a tooth hits a rock or obstruction, with rubber rod inserts allowing movement while maintaining down pressure.

Additional Information: The document emphasizes the importance of following label instructions and state and local regulations. The WF® and Redball® marks are trademarks of Willmar Fabrication, LLC.

Catalog excerpts

RT850 Reservoir Tillage • Improve Yield • Reduce Pollution • Aerate Ground • Create Water Reservoirs • Limit Runoff • Trap Nutrients • Conserve Water & Soil • Incorporate Liquid or Dry Fertilizer

Open the catalog to page 1

Willmar Fabrication, LLC 2205 Hall Ave. | Benson, MN 56215 P: 877-332-2551 or 320-843-1700 | F: 320-843-1703 www.willmarfab.com Fast Facts & Specifications RT850 Reservoir Tillage • Till between rows • Simple robust design with minimal moving parts • 16'' of travel (10'' up, 6'' down from operating position) RT850 Row Units • Abrasion resistant & austempered ductile iron blade • Replaceable blades, pitched left & right • Blades are set on 5.5'' spacing • Independent suspension • Sand can be added for additional weight and increase down pressure • Multiple row unit sizes can be mounted to a bar...

Open the catalog to page 2

RT850

RT850

Catalog excerpts

All Willmar Fabrication, LLC catalogs and technical brochures