- Catalogs
- Wyssen Seilbahnen AG
- Cableway Installation Equipment 2020
Cableway Installation Equipment 2020
Cableway Installation Equipment 2020
Introduction:
Wyssen Seilbahnen AG, with over 90 years of experience, provides a wide range of high-quality products for material cableways, skyline cranes, and cable cranes. Their products include cable winches, carriages, and accessories, focusing on quality, functionality, reliability, and safety.
Key Sections:
- Cable Deflection Rollers: Designed for skyline crane construction, available in steel and aluminum/plastic, featuring a safety factor of 5 and derailment guards.
- Triple Pulley Blocks: Guide the mainline for correct winding onto the winch drum, available in various sizes for different cable diameters.
- Cable Snatch Blocks: Lightweight and strong, optimized for forestry cable winches, available in two sizes for different tractive forces.
- Automatic Cable Deflection Roller: Allows loads to be pulled around obstacles without stopping, suitable for ground traction work.
- Mainline Idler Pulley: Prevents wear on the mainline by keeping it elevated, available in different sizes and weights.
- Cable Carrier with Brake: Keeps the mainline close to the skyline, preventing cable entanglement during wood transportation.
- Traversable Cable Carriers: Maintain the mainline at height, especially over long spans or obstacles.
- Terminal Mast Block with Clamp: Ensures optimal skyline tension and prevents cable breakage.
- Spar Tree Saddle: Supports the skyline at the terminal mast, allowing cable deflections up to 60°.
- Support Saddles: Protect cables over rock or concrete anchors, available in different types for various load capacities.
- Skyline Support Saddles: Available in types 2.5 and 5, designed for different load capacities and cable deflections.
Additional Products:
Wyssen also offers cable slings, anchoring cables, cable reels, winches, clamps, and safety equipment.
Conclusion:
Wyssen's products are characterized by Swiss-made quality, ensuring long service life and operational safety. They provide comprehensive services including consulting, project planning, sales, training, and after-sales support.
Specifications for steel and aluminum anchoring clamps used for holding and tensioning wire cables. These clamps feature a V-formed recess for various cable diameters and are secured with wire rope slings. Users should consult the instruction manual before use.
Ackja Cable Winch:
A lightweight device mounted on a sliding hull, powered by a Stihl MS 661 chainsaw motor, suitable for rough terrains.
Maasdam Cable Puller:
A robust cable puller made in the USA, available in single and double traction versions, used for pre-tensioning support guy wires, compliant with CE standards in Europe.
Habegger Hit Wire Rope Hoist:
Known for high quality and safety, available for tractive forces between 600 kg and 3200 kg, includes overload protection.
Wyssen Avalanche Control:
Specializes in remote avalanche control systems, with innovative solutions like the WAC.3® software for avalanche towers.
Small Cableway:
Designed for transporting baggage or building materials over short distances, featuring a lightweight carriage and simple electric winch operation.
Wyssen Sheave Block:
Used for pulling and tensioning wire cables, available in various load capacities with ball-bearing mounted aluminum rollers.
Automatic Skyline Clamp:
Used for rapid and secure tensioning of skylines, suitable for various steel wire cables, featuring automatic clamping.
Skymule - Plantation Cableway:
An environmentally friendly transport solution for plantations, enabling efficient transport over steep terrain without operating power.
Electronic Tension Measurement Device:
Details are cut off, but it is mentioned as a product by Wyssen.
Designed for measuring skyline cable tension using a tension gauge shackle, includes a 10-meter cable for remote reading. Various models available with load capacities ranging from 12 to 32 tonnes.
Electronic Tensioning Devices:
Wyssen offers devices with load measuring pins for direct measurement. The PIAB tension measurement device requires no batteries and is used with the automatic skyline clamp.
Wyssen Compass:
Developed for rough terrain, ideal for cableway construction, measures horizontal and vertical angles and azimuths.
Inclinometer:
Used for height and gradient measurements, featuring a small scale plate for wall approach determination.
Topochaix Terrain Measurement Device:
Measures cableway lengths up to 2500 meters with a biodegradable thread.
Multi-Tree Anchor:
Distributes skyline tension across multiple trees, handling loads up to 32 tonnes.
Rock Anchor Plate and Accessories:
Used in solid rock for anchoring, with a maximum load capacity of 24 tonnes.
Cable Tensioner:
Used for aligning and tensioning anchor cables, allowing for easy correction and realignment.
Wire Rope Cutter:
Provides easy cutting of wire ropes up to specified diameters.
Rotatable Anchor:
Allows for 360° horizontal and 45° vertical swiveling, suitable for laying cable lines in any direction.
Splicing Tool:
Essential for splicing steel wire cables, available as a complete set or individually.
Angle Grinder:
Provided for cutting steel wire cables and sharpening knives.
Wyssen Safety Belt and Climbing Equipment:
Designed for safe tree climbing, featuring nylon braided steel cables to prevent accidental cutting.
ICOM Radio Equipment:
Recommended for compatibility with existing systems, offering advantages like large buttons and a standard 2000 mAh battery.
Details on various radio communication equipment and accessories, focusing on Motorola and Icom products. The Icom IC-F34GS VHF radio telephone is discontinued, but accessories remain available. Motorola radio telephones are compatible with radio-controlled carriages.
Motorola GP340 VHF SET:
Includes a hand radio telephone without a display or keypad, capable of handling up to 16 channels, priced at 1,107.00 CHF or 971.05 EUR.
Accessories:
Various accessories listed with weights and prices, including desktop chargers, leather carrying cases, replacement batteries, and adapters.
Comparison and Recommendations:
Highlights advantages and disadvantages of the Motorola GP340 compared to the Icom F34.
Headphones and Microphones:
Headsets suitable for both Motorola and Icom radios are available.
Wyssen Fan Articles:
Additional merchandise such as Wyssen hats, longsleeves, Swiss Army knives, and tensioning sets are offered.
Company Information:
Contact details for Wyssen Seilbahnen AG in Switzerland and Wyssen Austria GmbH in Austria are provided.
Important Notices:
Includes disclaimers about the non-binding nature of offers, potential changes to products without notice, and the responsibility of the owner/user for equipment handling and compliance with regulations.
Catalog excerpts
Cableway Installation Equipment 2020
Open the catalog to page 1
Programm overview Cable deflection rollers Cable snatch blocks especially for rear cable winches Triple Pulley Blocks with mounting bracket Automatic cable deflection roller Mainline idler pulley Cable carrier with brake Traversable cable carriers Terminal mast block with clamp Clamp for terminal mast block Spar tree saddle Support saddles Skyline support saddle type 2.5 Skyline support saddle type 5 Special shakles Accessories for the skyline support saddle Mainline cable pulley blocks Curve saddle type 5 (modular) Support balances DQT-Support material DQT-Support elements Single DQT support...
Open the catalog to page 2
Cable deflection rollers The high quality Wyssen cable deflection rollers have been specially developed for skyline crane construction and operation, but today they are used for all types of hoisting and ground traction work. All our cable deflection rollers have a safety factor of 5. The models made of steel are particularly suitable for fast-running cables with a high load. The blocks made of aluminium/ plastic are on account of their light weight ideally suitable for assembly work (for manual operation only). The permanently lubricated ball-bearings and the high-strength materials guarantee...
Open the catalog to page 3
Cable snatch blocks especially for rear cable winches Automatic cable deflection roller The automatically opening cable deflection roller permits loads to be pulled around obstacles without stopping. The automatic deflection roller opens as soon as the hook / spindle heads or cable clamp hits against the shift fork. This saves a laborious manual unclipping of the roller. The roller is available for load capacities of 2.5 and 5 tonnes and may only be used for ground traction work. Do not exceed the max. cable tractive force, especially in operation with tractor winches. The extremely light and...
Open the catalog to page 4
Cable carrier with brake Terminal mast block with clamp The cable carrier holds the mainline up and close to the skyline so that wood can be safely transported away at the landing place. Thus the danger of the traction cable getting caught on the wood or on the gripper / processor of the excavator can be excluded. It is braced laterally from above and the automatic brake prevents running back when the traction cable pulley is under load. In addition there is a collision protection for the cable carrier, with which the cable carrier strikes the Wyssen skyline support saddle and is stopped. This...
Open the catalog to page 5
Spar tree saddle Support saddles The spar tree saddle serves to hold up the skyline at the terminal mast. It is used on the side where the skyline is anchored only and not under tension. Compared to conventional skyline support saddles, the spar tree saddle features are the light weight and cable deflections up to 60°. The support saddle primarily serves as a skyline support over rock or concrete anchors, so that damage to the cable is prevented. Wyssen cable winch W-40
Open the catalog to page 6
Skyline support saddle type 2.5 Special shakles The tried and tested Wyssen skyline support saddle has been used for several years worldwide. It has excelled through its extreme high strength and at the same time its light weight. The skyline support saddle type 2.5 is designed for a maximum saddle pressure of 6 t (safety factor of 4) and a max. cable deflection of 30°, which can be used for carriages 2.5 t, HY-2, HY-3, HY-4, slack-puller and the universal carriage. If the saddle pressure is greater or the cable deflection is more than 30° two saddles must be used together with the Wyssen support...
Open the catalog to page 7
Mainline cable pulley blocks Support balances The function of the mainline cable pulley blocks is to position the mainline high up on the skyline support saddle. This can simply be attached to the skyline support saddle or taken away. The 2 or 4 roller block enables the mainline run through smoothly, thus reducing wear. The mainline cable pulley blocks can be used with the suitable drive units (e.g. supply cableways to Alpine farms). 2 rollers for the skyline support saddle type 2.5 (to 7.1000) 4 rollers for the skyline support saddle type 5 (to 7.2000) Curve saddle type 5 (modular) The curve...
Open the catalog to page 8
DQT-Support material Triple DQT support With Wyssens’ DQT support elements (width across corners 0.5 m), supports (single to triple) can be modularly assembled in different heights. You can also order complete supports from us in the desired height including standard anchoring materials. When constructing a support, please observe the respective approved support pressure. Further DQT material and larger elements (width across corners 1.0 m) are available on request. DQT Steel grid support element, length 2 m DQT Steel grid support element, length 1 m DQT Steel grid support element, length 1 m...
Open the catalog to page 9
Cable slings Choker ring Cable slings with sling hooks (cable construction 6x25FW+WC/galvanised), with a stud on one side and slings for the choker ring on the other side, are available with 11 mm and 13 mm diameters in various lengths. Wyssen sling hooks are tested for cracks and are made out of high-quality material, that depending on the length of the sling are in each case indicated in the appropriate colour. On request we can manufacture choker slings in other lengths for you. Max. loading (3fold safety factor) CHF for 1 article CHF for 10 articles CHF for 20 articles EUR for 1 article EUR...
Open the catalog to page 10
Cable sling with sliding hook *3-fold safety factor Article no. Wire rope slings Cable slings with sling hooks (cable construction 6x36WS+FC/galvanised) at one end with a loop and thimble to clip into the sliding hook when wrapping round the tree and at the other end a loop for clipping into the skyline support saddle, are used for rapid and safe suspension of the skyline support saddle onto tree supports. On request we can also manufacture cable slings in other lengths for you up to a max. ø 24 mm. The continuous wire rope slings (cable construction 6x36WS+FC/galvanised) is primarily used for...
Open the catalog to page 11
Anchoring cables Cable reels Anchoring cables (guy line cable) are galvanised with a thimble or loop at one end are used for anchoring supports, cable winches, multiple tree anchors etc. These are available in different standard lengths and diameters as well as in other desired dimensions. with thimble and pressing with thimble and pressing with thimble and pressing with thimble and pressing with thimble and pressing with loop and pressing with loop and pressing with loop and pressing with loop and pressing with loop and pressing with loop and pressing with loop and pressing with loop and pressing...
Open the catalog to page 12All Wyssen Seilbahnen AG catalogs and technical brochures
Main brochure23 Pages
CABLEWAY SYSTEMS JAPANESE 201721 Pages
