XAG P100 Agricultural Drone
42Pages

Dear user, thank you for choosing XAG's products. For safety purposes and better user experience, it is highly recommended that you read this manual carefully and strictly follow the instructions hereof. If you have any questions about this document, please contact our Technical Support team via email: info@xa.com

Contents Disclaimer Safety Guidelines List of Items Main Components Pre-flight Preparation Install RevoSpray System Connect Cables Connect Liquid Tubes Unfold Spraying Bars Remove/Install Spraying Bars Prepare Smart Battery Unfold Propellers Check Battery Status Prepare ACS2 Prepare Smart Liquid Tank Safe Parking Wiring Quick Guide Indicator Description Specifications

01. lease read this User Manual carefully before using this product, as it has much to do with both operational P safety and your legitimate rights and interests, whether you are a buyer or a user. You shall be deemed to have read, understood, agreed and acknowledged all terms and conditions and information stated herein upon activation and use of the product. 02. ot being a toy, plus for certain safety risks, the product is NOT suitable for those who are under 18 years N old, or those who have no or limited capacity for civil conduct, or those with mobility impairments, or those without a...

Safety Guidelines • lease make sure that you have completed a drone pilot training program, passed the exam and obtained a P UAS operator certificate prescribed by laws and regulations where the product is used before use. Otherwise, you shall NOT operate the product. • Instead of operating alone, the beginner should seek help from a veteran beforehand and operate the aircraft accompanied by a veteran. • t is necessary to observe the surroundings in advance to ensure an open operation area with no buildings and I obstructions around, clear of electromagnetic interference sources including...

lease keep the battery at 40%-60% when storing an idle aircraft. The storage area should be dry, wellp ventilated and clean. • lease make sure to remove the battery and put it in a safe, level place before transporting the aircraft. (See P page 16 for "Battery Safety Precautions") • or long-term storage or long-distance transportation, please remove the liquid tank from the aircraft and F empty it, and store the aircraft in a cool, dry place. • Keep the product away from heat to prevent damage to the electronic component and other parts or fire incidents. • ever take human bodies or...

XAG P100 Agricultural Drone (hereinafter "aircraft") features a simplified modular design, high stability, easy removal and multi-mode operations. Its all-new SuperX 4 pro Intelligent Control System, combined with the XAG RealTerra, RevoSpray and RevoCast systems and the Multi-directional Radar Matrix, delivers high-efficiency and high-quality farming operations like precision spraying, even spreading and smart mapping, making it arguably a stable and reliable all-rounder in agriculture. The list below contains two boxes - the P100 airframe box and the XAG RevoSpray 2 box. Please see that...

Fig.1 Airframe Module Structure ② PSL Pilot Sight Livestream ④ UPS Battery Backup ⑤ Airframe Hasp ⑥ ESC (Electronic Speed Controller) ⑦ Motor ⑨ Landing Gear Mounting Bracket ⑪ Pe

Fig.2 Airframe Module & Arms ⑱ Airframe Nameplate ⑲ Status Indicator Propellers of Arm 1 and 3 rotate clockwise. Propellers of Arm 2 and 4 rotate counterclockwise he laser-etched numbers on the upper central compartment and motor covers denote the arm position T numbers - 1 3 for Arm 1/3, 2 4 for Arm 2/4, 1 3 and 2 4 on the arms with nozzles for Arm 3 an

Pre-flight Preparation Install RevoSpray System Lift the airframe. Run the two liquid tubes through the gap between the airframe and the RevoSpray system. Put down the airframe with care and attach it to the RevoSpray system by lining up the holes on the bottom of the airframe with the bosses on the top of the RevoSpray system. Liquid Tube Lock the hasp on the airframe to the hook on the RevoSpray system.

Connect Cables Connect the mount cable and the RevoSpray cable. Affix them to the cable holder above the peristaltic pumps. RevoSpray Cable Mount Cable Connect Liquid Tubes Connect the two liquid tubes to the connectors of the peristaltic pumps and strap them tightly with cable ties. Liquid Tube Cable Tie

Unfold Spraying Bars Raise the spraying bar inward and then spread it out (Take Arm 4 for example).

Remove/Install Spraying Bars Removal Instructions: ① Remove the cable cover on the spraying bar, detach the nozzle signal cable (6pin) and replace the cover. ② Detach the liquid tube and extract it together with the nozzle signal cable from the bar. ③ Turn the quick-release knob counterclockwise to remove the bar. Installation Instructions: ① Line up the alignment mark of the spraying bar with that of the mount, then turn the quick-release knob clockwise until tight. ② ut the nozzle signal cable into the bar. Run the liquid tube through the bar, connect it to the nozzle's P fitting and...

Unfold Propellers Spread out 4 propellers and see whether their models, which could be found between the clamp and the blade, match those on the arms respectively. CW propellers, rotating clockwise, should be on Arm 1 and 3. CCW propellers, rotating counterclockwise, should be on Arm 2 and 4. Arm 2 CW propeller and CCW propeller are NOT interchangeable, or it could cause accidents.

Prepare Smart Battery Indicators/Buttons There is 1 power button and 6 indicators on the smart battery screen. Solid: Normal Slow Flash: Overcooling Fast Flash: Overheating Double Flash: Error Battery Level Indicator Battery Status Indicator Power Button Long press twice to power on/off: Upon connection with the aircraft or the charger, long-press the power button for at least 1 second until all the battery level indicators flash simultaneously, followed by another long-press for at least 1 second until the battery beeps and all the status indicators are on/off. Charge Battery Charge the...