Centrifugal Sand Separators

Product catalog summary

Overview
Yardney Centrifugal Sand Separators are designed for the efficient removal of suspended solids and inorganic materials with a specific gravity of 2 or greater. These systems are effective for removing particles down to 75 microns and are suitable for protecting irrigation systems.

Specifications
The separators are constructed from carbon steel and are rated to 150 psi. They are available with threaded or flanged inlet/outlet connections. Vertical models are designed for smaller installations, while larger models are angled and mounted on the floor or ground.

Applications

Removal of sand, rock, grit, and other inorganic contaminants.
Protection of drip and micro-irrigation systems.
Pre-filtering to enhance sand media or screen filter performance.

Advantages

98% efficiency in removing solids down to 75 microns.
Multiple units can be used in series for higher filtration efficiency.
Available in ASME code or non-code construction.
Options for manual or automatic solids purge valve systems.
Special alloys and coatings available for extended product life.

Models and Flow Rates
Angled Models: Flow rates range from 200 gpm to 7800 gpm, with various inlet/outlet sizes.
Vertical Models: Flow rates range from 4 gpm to 345 gpm, with NPT threaded connections.

Dimensions
Detailed dimensions are provided for both angled and vertical models, ensuring proper fit and installation.

Contact Information
For more information, contact Yardney Water Management Systems at 951.656.6716 or [email protected].

Catalog excerpts

I Centrifugal Sand Separators For Centrifugal Removal of Sand, Silt and Gravel from Water

Open the catalog to page 1

I Centrifugal Sand Separators Time. Quality. Experience. Knowledge. Yardney Centrifugal Sand Separators are ideal for removal of suspended solids and inorganic materials with a specific gravity of 2 or greater. This highly effective system will provide consistent, simple removal of inorganic material down to 75 microns. Easily installed, these carbon steel units are rated to 150 psi with threaded or flanged inlet/outlet connections. Smaller models are designed for vertical installation while larger models are angled and floor or ground mounted. Sizing must be within the specified flow range for...

Open the catalog to page 2

SPECIFICATIONS | CENTRIFUGAL SAND SEPARATOR | Angled Standard assembly includes: ■ Welded carbon steel > Vertical models include female threaded inlet and outlet connections and a threaded purge port for purging of contaminants or hookup of automatic flush valve > Angled models include flanged inlet and outlet connections and a threaded purge port for purging of contaminants or hookup of automatic flush valve Available options: ■ ASME code ■ High pressure Liquid/solid mix enters unit tangentially, inducing centrifugal action Centrifugal action moves heavier particles to sides of the separator...

Open the catalog to page 3

Open the catalog to page 4

Centrifugal Sand Separators

Centrifugal Sand Separators

Catalog excerpts

All Yardney Water Filtration Systems catalogs and technical brochures