*myagriexpo

NIMET

Product catalog summary

Introduction

This document is the user manual and spare parts catalogue for the NİMET Stone Picker machine, designed for efficient stone removal in agricultural fields. It highlights the machine's advantages such as significant time savings and prevention of seed loss by effectively cleaning stones from the soil, which also protects harvesting machinery from damage.

Frequently Asked Questions (FAQs)

Terrain Conditions: The land should be plowed and dry to avoid damage from moist soil.
Weather Conditions: The machine is suitable for use in non-rainy and non-snowy weather.
Tractor Speed and RPM: Operate the machine at approximately 1,500 rpm in a heavy gear.
Tank Emptying: No need to leave the field; the machine discharges between 190 cm and 300 cm height depending on the model, allowing emptying into trucks or trailers.
Longevity Tips: Lubricate the machine after every use and perform routine maintenance as detailed in the manual.

Technical Specifications

Key machine parameters include:

Length: 5000 mm
Width: 2440 mm
Height: 2400 mm
Discharging Height: 2350 mm
Working Width: 1750 mm
Working Depth: 300 mm
Screen Width: 1530 mm
Screen Length: 890 mm
Distance Between Screens: 30 mm
Screen Angle: 35°
Total Screens: 28
Tank Capacity: 4000 liters
Tank Width: 1500 mm
Tank Angle: 15°
Pallet Width: 1535 mm
Pallet Diameter: 1485 mm
Total Fingers: 64
Total Pallet Sets: 8
Machine Weight: 3550 kg
PTO Rotation: 540 rpm
Pallet Rotation: 90 rpm
Tire Dimensions: 12.5/80-18
Minimum Power Requirement: 80 HP

Maintenance and Lubrication

Grease fittings must be lubricated before every use.
The pallet system should be checked before operation.

Working Settings and Operational Guidelines

Lubricate all indicated parts carefully; stop the tractor during greasing.
Set tractor PTO speed to 540 rpm.
Do not move the machine until pallets reach the required speed.
Operate tractor at slow speed, heavy gear, 1st gear, 1500 rpm.
Stop the machine gently when the tank is full.
Do not stop pallets or move the machine before the screening unit is empty.
Avoid overfilling the screening unit with soil or mud.
Lift the tank before discharging; do not start pallets before the tank is fully lowered.
For maintenance, stop the tractor and install safety pins.
Take turns slowly and with wide angles to avoid damage.
Ensure proper connection of PTO shaft, pins, hydraulic hoses, and lubrication points before operation.
Check tank and brake linings regularly.

Spare Parts Catalogue

The catalogue provides detailed parts lists with codes and descriptions in both Turkish and English for the following components:

Chassis (e.g., main chassis, blades, bolts, bearings, hydraulic pipes)
Pallet (e.g., pallet chassis, shafts, fingers, gears, bolts)
Gearbox (e.g., gearbox housing, shafts, bearings, seals)
Hydraulic Pull Arm (e.g., pull chassis, shaft bearings, bolts, hose holders)
Tank Lift (e.g., lift pipe, shaft, O-rings, pistons, seals)
Arrow Lift (e.g., front lift, hydraulic hoses, pistons, seals)
Tires (e.g., axle, bearings, hub, rims, tires)

Each section includes part codes, Turkish and English names, and illustrations for easy identification and ordering.

Maintenance Chart

A maintenance log table is provided for recording dates and details of performed maintenance activities to ensure proper upkeep and longevity of the machine.

Critical Recommendations and Limitations

Operate only on dry, plowed land to prevent damage.
Avoid use in rainy or snowy weather.
Maintain correct tractor PTO speed and gear settings.
Perform lubrication and maintenance regularly to extend machine life.
Follow operational guidelines strictly to avoid mechanical failures.
Use the spare parts catalogue for accurate replacement and repair.

Catalog excerpts

www.yukseltarim.com [email protected] Büyük Kayacık Mah. 4 Organize Sanayi Bölgesi 405 Nolu Sk. No: 14 Selçuklu / KONYA N MET TA Ş TOPLAMA MAK NASI STONE PICKER KULLANIM KILAVUZU & YEDEK PARÇA KATALOĞU USER MANUAL & SPARE PARTS CATA

Open the catalog to page 1

\iiKSEL TARIM iCiNDEKiLER INDEX YiiKSEL TARIM SIK SORULAN SORULAR FREQUENTLY ASKED QUESTIONS _ MAKiNANIN TEKNiK OZELLiKLERi TECHNICAL DATA OF THE MACHINE _ BAKIM VE YAGLAMA MAINTENANCE AND LUBRICATING _ CALISMA AYARLARI WORKING SETTINGS DiKKAT EDiLMESi GEREKEN HUSUSLAR ISSUES TO BE CONCERNED YEDEK PARCA KATALOGU SPARE PARTS CATALOGUE _ BAKIM ONARIM TABLOSU MAINTENANCE CHART 25

Open the catalog to page 2

TANITIM INTRODUCTION Taş toplama makinasının çiftçiler için en büyük avantajlarından birisi zaman tasarrufudur. Taşlı tarım arazilerinde insan gücü ile yapılan taş temizliği çok zaman almaktadır ve etkili değildir. El ile yapılan temizlikte tohumun yerleştirileceği zemin altı taşlar temizlenmeyebilir. One of the biggest advantages of the stone picking machine for farmers is the time saving. Stone cleaning done with human power in agricultural lands take a lot of time and is not effective. In the manual cleaning the underground stones where the seed will be placed may not be cleaned. Taş toplama...

Open the catalog to page 3

\iiKSELTARIM MAKiNANIN TEKNiK OZELLiKLERi BAKIM VE YAGLAMATECHNICAL DATA OF THE MACHINE MAINTENANCE AND LUBRICATING YtiKSELTARIM Makinanin gresorlukleri her calisma oncesinde mutlaka yaglanmalidir. Machine must be lubricated before every usage. MAKiNE UZUNLUGU 5000 MACHINE LENGHT (A) Palet sistemi her calisma oncesinde mutlaka kontrol edilmelidir. Pallet should be checked before every usage 05 06

Open the catalog to page 4

ÇALIŞMA AYARLARI WORKING SETTINGS Pimi takın. Connect the pin. Hidrolik hortumları traktöre bağlayın. Connect hydraulic hoses to tractor. D KKAT ED LMES GEREKEN HUSUSLAR ISSUES TO BE CONCERNED Makinenin gresörlükleri ve belirtilen her yeri özenle yağlanmalıdır. Indicated parts must be lubricated carefully. Yağlama esnasında traktör stop edilmelidir. Stop the machine while greasing. Traktör kuyruk mili çalışma devri 540 rpm olarak ayarlanmalıdır. Adjust the tractor's PTO to 540 rpm. Şaftı takıp pimleri yerleştirin. Connect the PTO and pins. Gresörlükleri yağlayın. Lubricate required parts. Palet,...

Open the catalog to page 5

\iiKSEL TARIM NiMET KULLANIM KILAVUZU & YEDEK PARCA KATALOGU YuKSEL USER MANUAL & SPARE PARTS CATALOGUE Turkce Sase Kazan Elek Palet Siperlik Sanziman Hidrolik Ceki Aparati Depo Lifti Ok Lifti Lastik Zincir Zincir Siperligi Saft English Chasis Tank Sieve Pallet Cover Gearbox Hydraulic Arm Pull Tank Lift Arrow Lift Tire Chain Chain Cover Shaft

Open the catalog to page 6

KULLANIM KILAVUZU & YEDEK PARCA KATALOGU USER MANUAL & SPARE PARTS CATALOGUE Turkce Ana Sase Bicak Civata Somun Civata 516 Yatak Somun 511 Yatak Somun Civata Hidrolik Boru Kazan Hortumu Hidrolik Hortum Gergi Topuzu Takimi Alt Govde Yayli Pim Rulman Kece Manson Kilitli Pul Ust Govde Civata Gresorluk Mil Rulman Gergi Topuzu Sekman Pul Somun Gresorluk English Main Chasis Blade Bolt Nuts Bolt 516 Bearing Nuts 511 Bearing Nuts Bolt Hydraulic Pipe Tank Hose Tractor Hose Tensioner Knob Kit Bottom Body Spring Pin Roller Seal Muff Lock Washer Upper Body Bolt Nipple Shaft Roller Tensioner Knob Ring Washer Nuts Grease...

Open the catalog to page 7

KULLANIM KILAVUZU & YEDEK PARCA KATALOGU YuKSEL USER MANUAL & SPARE PARTS CATALOGUE Turkce Palet Sasesi Mil Kama Tam Parmak Grubu Yarim Parmak Grubu Civata Somun Yay Gergi Civatasi Somun Havsa imbus Disli Pul Civata Dokum Kurtagzi Burc Cift Basli Mil Somun Parmak Govdesi Ara Burc Civata Somun Lama Civata English Pallet Chasis Shaft Spline Full Finger Set Half Finger Set Bolt Nut Spring Tensioning Bolt Nut Countersink Imbus Gear Washer Bolt Dovetail Bushing Shaft Nut Body Bushing Bolt Nut Metal Plate Bolt

Open the catalog to page 8

KULLANIM KILAVUZU & YEDEK PARCA KATALOGU USER MANUAL & SPARE PARTS CATALOGUE Turkce Sanziman Kutusu Ara Balatali Saft Disli Mili Kama Kucuk Disli Pul Civata Ara Saft Govde Porya Rulman Rulman Mil Kama Disli Segman Kece Somun Sag Kapak On Porya Disli Mili Super Pul Kor Tapa Ust Kapak Nefeslik imbus Civata English Gearbox Shank Shaft Gear Shaft Spline Small Gear Washer Bolt Middle Shaft Body Hub Bearing Bearing Shaft Spline Gear Ring Seal Nut Right Cover Front Hub Gear Shaft Super Washer Blind Nut Upper Cover Record Imbus Bolt

Open the catalog to page 9

NMT.07 HiDROLiK CEKi APARATI HYDRAULIC PULL ARM KULLANIM KILAVUZU & YEDEK PARCA KATALOGU USER MANUAL & SPARE PARTS CATALOGUE Turkce Ceki Sasesi Saft Yatagi Civata Somun Horoz Govde Horoz Yatagi Rulman Ara Boru Kece Sekman Masonluk Somun Kilitli Pul Somun Civata Hortum Tutucu Gresorluk Pul Somun English Pull Chasis Shaft Bearing Bolt Nut Bearing Body Main Bearing Bearing Pipe Seal Ring Nut Lock Washer Nut Bolt Hose Holder Grease Fitting Washer Nut

Open the catalog to page 10

NMT.08 DEPO LiFTi TANK LIFT KULLANIM KILAVUZU & YEDEK PARCA KATALOGU YuKSEL USER MANUAL & SPARE PARTS CATALOGUE English Lift Pipe Lift Shaft O-Ring Piston Compact Set O-Ring Record Oil Seal Dust Seal Nipple

Open the catalog to page 11

NMT.09 OK LiFTi ARROW LIFT KULLANIM KILAVUZU & YEDEK PARCA KATALOGU YuKSEL USER MANUAL & SPARE PARTS CATALOGUE Turkce On Lift On Lift Tesisat T Dirsek Hidrolik Hortum Lift Borusu Lift Mili Oring Piston Kompakt Set Kep Toz Kecesi Yag Kecesi Oring Nefeslik English Front Lift Front Lift Fitting T Elbow Hydraulic Hose Lift Pipe Lift Shaft O-Ring Piston Compact Set Record Dust Seal Oil Seal O-Ring Record

Open the catalog to page 12

KULLANIM KILAVUZU & YEDEK PARCA KATALOGU YuKSEL USER MANUAL & SPARE PARTS CATALOGUE Turkce Dingil - Mil Pul Rulman Porya Gresorluk Rulman Kilitli Somun Yayli Pim Porya Kapagi Civata Bijon Jant Lastik English Axle - Shaft Washer Bearing Hub Grease Fitting Bearing Locker Nut Spring Pin Hub Cover Bolt Stud Rim Tire

Open the catalog to page 13

BAKIM ONARIM TABLOSU MAINTENANCE CHART BAKIM ONARIM TABLOSU MAINTENANCE CHART Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date Yapılan Bakım / Maintenance Tarih / Date

Open the catalog to page 14

All Yüksel Tarım catalogs and technical brochures

ONLINE CATALOGUE
24 Pages
M5
10 Pages
M4
10 Pages
SERVET
14 Pages
BAŞAK
14 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list