RELOADING STORE BUNKER
5Pages

RELOADING STORE BUNKER

RELOADING STORE BUNKER PRINCIPLE OF OPERATION: Horizontal feed auger transports grain to vertical unloading auger that reloads it. Auger spirals are made of special steel produced by Tehnofer (Italy). The spirals are perfectly centered before installing, so that the grain is not exposed to damage. The augers are powered by the tractor PTO at 540/1000 rpm. VOLUME FROM 16 TO 50 M3, CARRYING CAPACITY – FROM 12 TO 40 TONS. It is used for: – Transportation of grain from the combine and reloading it into the machine; – Loading of seeding machines; – Loading of BigBag. Advantages: – Increasing of...

THE HYDRAULIC SLIDE GATE Novelty-2017! PBN-9 A slide gate that opens hydraulically. It feeds grain into an auger. Indicator of slide gate opening The slide gate is in each bunker. It opens hydraulically by a hydraulic cylinder. It prevents the peak load of the horizontal auger (augers run first, and then the slide gate opens). The hydraulic slide gate allows to adjust grain or fertilizer feed while loading seeding machines. CLEANING SYSTEM OF AUGER CONVEYER Hydraulic auger visor (optional) directs the flow of grain. It loads evenly the car under left and right side. Three cleaning flaps of...

LOADING OF SEEDING MACHINES The auger elongator ShRP-5. Length 5 m, diameter 250 mm, capacity 2 t / min. It is installed on the fi rst auger step. It is powered by tractor hydraulics. It is used to load wide seeding machines. Loading of grain bunker Loading of seeding machines through PVC hose A hydraulically steering first and last axles (PBN-40 and PBN-50). Adapter for height adjustment to hitch to any tractor Packaging of grain in Silo Bag UNIVERSAL CHASSIS Two viewing windows Four trailers on one CHASSIS, buying Reloading Store Bunker today, you have a chance to buy a dumping Body, Body...

Amount of axles, pсs Wheel size Required tractor power, hp Productivity, t/min: - 540 rpm - 1000 rpm Specifi cations: ¾¾ pneumatic brake system (single-circuit, dual-circuit), hydraulic, individual approach; ¾¾ axles (ADR Italy); ¾¾ disks (Poland); ¾¾ reduction gear (Bondioli & Pavesi, Italy); ¾¾ cardan shaft (Bondioli & Pavesi, Italy); ¾¾ spiral auger (Tehnofer, Italy); ¾¾ removable tow ring Ø 40,50,90mm (Scharmuller, Austria) – individual approach; ¾¾ hydraulic prop. ZAVOD KOBZARENKO: Ukraine, 42500, Sumy region., Lypova Dolyna, Rusanovscka street, 17 Mob. +38 (050) 331-95-91 Kobzarenko...