BeltFeeders Feeding at Your Convenience Do you need a reliable way to feed your fish/shrimp without relying upon electricity? Belt Feeders are your answer. Belt Feeders slowly dispense feed, flakes, pellets, medication, and water treatment chemicals just above the water surface. The feed floats and is evenly distributed with the water current so all fish/shrimp have an equal opportunity to feed. Your fish/shrimp will experience more uniform growth, improved health, and reduced mortality. Continuous feeding produces faster growth as compared to time consuming hand feeding. You will maximize production and minimize costs since the Belt Feeders are inexpensive and save time and labor. Proven by over 7000 units installed in North America, Belt Feeders can be used indoors and outdoors. It is weatherproof, easy to clean and maintain. Electricity is not required; rather, a spring wound clock mechanism distributes the feed. If service is required, it can be done easily on-site. We have a complete inventory of maintenance kits and spare parts. Provides trouble-free service. There are two sizes available, the Baby Belt Feeder has a 5 pound capacity and the Belt Feeder has a 10 pound capacity. Each unit is available with a 12-hour or 24-hour clock. Features Benefits Weatherproof construction Easy operation No electrical power required Dispense any bulk material Feed Medication Water treatment chemicals Trouble-free operation 6 Month warranty from date of purchase Stainless steel spring SPECIFICATION Length Depth Height Capacity Shipping weight (empty) Product number 12 hr. Product number 24 hr. Benefits Save time Save labor Inexpensive Even animal growth Improve health Reduce mortality Easy to clean and maintain Prevents rust & corrosion Maintenance Kits: For a 12-hour kit, please specify product number 912885 or for a 24-hour kit specify number 912886. Kit Includes: 12 hour or 24 hour clock, Main Spring, Dowel-Clock Side, Dowel-Spring Side, Orange Tabs-2 pieces SEE REVERSE FOR FEEDER OPERATION

BeltFeeders Feeding at Your Convenience Feeder Operation 1. Lift lid. 2. Pull belt back (this will wind the clock). *To avoid damage to the clock, pull belt back inside tray to avoid over winding the clock. 3. Adjust feed quantities on belt. 4. Close lid and listen for the clock. Stainless Clock Replacement – 12-hour Clock #912867 24-hour Clock #912870 1. Remove clear clock cover. 2. Remove 2 brass nuts. 3. Remove the clock (this might require some tension, release by adjusting the belt approximately 4 inches.) 4. Replace clock mechanism (see below). Main Spring Replacement #912877 1. Belt should...