Zenport EP26 Cordless ePruner
25Pages

Zenport EP26 Cordless ePruner User’s Manual Note: Please read this manual carefully before using the tool. 1

Safety Precautions In order to ensure your safety and the safety of others, please read this manual carefully before using your Zenport ePruner for the first time. Keep this manual in a safe place. If changes are made, be sure to check the updated contents. If ownership of your ePruner changes, please forward this manual to the new owner. Symbols Defined This section details the basic safety symbols on the machine. The Symbols in the Manual Warning: Use extreme caution to prevent damage or injury. Instruction: Steps to prevent damage and safety. Help: Information to help improve the...

The Symbols on the Charger Warning! Use extreme caution to prevent damage or injury. Please read before operating Indoor use only Temperature Protection Class II Device Disposal: Please do not dispose of batteries in your household trash. Please take old or used batteries to your local recycling station General Power Tool Safety Instructions Warning! 1) Read all safety directions and instructions. Failure to follow the warnings and instructions below may result in electric shock, fire, and/or serious injury. 2) Keep all safety directions and instructions for future reference. 3) In all the...

Never use the cord to carry, pull or unplug the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. • Damaged or entangled cords increase the risk of electric shock. • Threading the power cord through a picking sleeve will prevent the cord tangling or getting cut. 6) When using power tools outdoors, use an outdoor external cord. A cord suitable for outdoor use will reduce the risk of electric shock. 7) If charging the tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. Bodily...

5) Do not allow power tools to be operated by people unfamiliar with power tools or these instructions. Power tools are dangerous in the hands of untrained users. 6) Power tool maintenance: check that the moving parts are in place and not stuck, check the damage of the parts and other conditions that affect the operation of the power tool. In case of damage, the power tool should be repaired before use. Many accidents are caused by poorly maintained power tools. 7) Keep the moving cutting and non-moving blades sharp and clean. Well-maintained tools with sharp cutting edges are less likely...

Do not wear loose, lengthy clothing and jewelry to avoid getting caught in moving parts. Do not use this tool with bare feet or slippers. Do not use this pruning shear in the rain or near strong magnetic fields. This product is designed to trim hedges and branches. Do not use for cutting hard wood and other items. 6) Do not attempt to remove the jammed blade until the power is turned off. 7) Before starting to trim, check the hidden items in the hedge and branches, such as wires, wires, etc. 8) When using this product, always hold the tool with one hand and keep at least 6-inches away from...

Warning! When in use, the electric device will generate an electromagnetic field. In certain circumstances, this magnetic field can damage the function of the human implant. In order to avoid serious injury, we recommend users who have implants in the body, consult the doctor and the manufacturer of the implant before using this product. Do not touch the blade while the ePruner is on to avoid personal injury. Intended Use This device can be used for trimming hedges, shrubs, vines and branches. If this product is used for other non-plant material pruning purposes, it may cause damage to the...

Product Overview %" *" Cutting blade Fixed blade Blade fixing mechanism Trigger Grip Switch Display screen Battery Charger

Display screen Display description No. Description Fault Indicator 1. The electronic control system is normal when C is displayed. 2. Failure of electronic control system when displaying E. pruning session. Recommend maintenance after the number of cuts reach nearly 500,000.

When the fault indicator displays E. the numbers of cuts in total will be display with the following code Code Means displays Software overflows 1 2 Hardware current sampling fault 3 Blocked 4 Undervoltage 5 6 7 8 Motor open phase Hall signal failure Pruning Shears 1-inch/25mm (live branches) .6 inches/15mm (dead branches） Rated Voltage DC14.4V Rated Power 150 W Rated Current 10.0 A Current Protection Stop Point ≥45A Protection Level Ⅱ Weight 0.9Kg lithium-ion Battery (2 batteries included) Capacity 2.5 Ah Voltage 14.4V Operating Hours 4h Weight (battery) 0.25kg Charger Rated Voltage...

Included Items Please carefully open the package and check that the parts are complete: • • • • • Electric Pruning Shears Battery x 2 Charger Toolbox Instruction Manual Charging the Battery Do not expose the battery to extreme conditions such as high temperatures or shocks. Otherwise, personal injury will result from leakage of the electrolytic solution. Before charging, check that the battery surface is clean and dry. • • • The battery of this product is fully charged before delivery. Therefore, it must be fully charged before first use. Charge the battery when the power indicator light is...

When charging the battery, the pruning shears must be disconnected. Working Conditions 1.) Keep the charging temperature of the charger and battery pack between 32° F ~ 113°F, and the battery pack discharge temperature between 14°F ~ 140°F. 2.) The working temperature of the pruning shears 23°F ~ 86°F Proper Use of the Battery Charger 1) Only use the supplied charger to charge the battery. Failure to do so may result in fire or explosion. Use the matching charger to ensure the safety of the device. 2) Check the charger, cord and plug before each use. If it is damaged, please have it...

Assembly Please check that the pruning shears, wires and batteries are clean and dry, and then follow the steps below to assemble: 1) Place the battery pack in the battery compartment, securing the battery after you hear a click. Make sure that the connector is facing right if you are right-handed 2) Check the opening and closing position of the pruning shears 3) Grip the handle with your hands 4) Turn on the power switch, pull two scissors to the trigger in a row and open the scissor head. You can start the operation. Operating Instructions When using this device, wear suitable clothing...