Catálogos >
APEM GmbH >
QRM14 series

QRM14 series
1 / 4Páginas

Excertos do catálogo

Ø 14 mm rear panel mount LED indicators DISTINCTIVE FEATURES IP67 Sealed Bi-Color & Tri-Color Options 2 to 28 VDC 200 mm wire terminations ENVIRONMENTAL SPECIFICATIONS • IP67 sealing option (EN60529) • Operating Temperature Range: -40 °C to +85 °C ( –40 °F to +185 °F) • Storage Temperature Range: -55 °C to +100 °C (-67 °F to +212 °F) GENERAL SPECIFICATIONS • Max Reverse Voltage: 5 V • Viewing Angle: 60° • Life Expectancy: 100,000 hours • Max Panel Thickness: 3.5 mm • Torque: 75 cNm (Ø 14 mm) • Insulation resistance : 4,000 MΩ at 500 VDC • Salt spray test: 96 hours (IEC 68-2-11) MATERIALS • Body: Black plated brass or anodized aluminum • Lock Washer: Spring steel • Nut: Black plated brass • Terminal Seal: Epoxy • Panel Seal: Nitrile O-ring • Wires: 22A WG - Approved to UL1007 The company reserves the right to change specifications without notice. LED characteristics are dependent upon environmental conditions. Therefore published data should be cons

Abrir o catálogo na página 1

QRM14 series Ø 14 mm rear panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage STANDARD LED INTENSITY LED COMPONENT SPECIFICATIONS Flush Forward Voltage Bi-color (Typical) (Red/Green) Tri-color (Typical) (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Flush Forward Voltage HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Flush Forward Voltage • The operating voltage must not be...

Abrir o catálogo na página 2

Ø 14 mm rear panel mount LED indicators BUILD YOUR PART NUMBER MOUNTING HOLE BEZEL FINISH Fixed Light Hyper Bright Green Anodized Dark Olive Anodized Black Hyper Bright Yellow Super Bright White Hyper Bright Orange Super Bright Orange Super Bright Green Red/Yellow Green/Yellow Super Bright Yellow Super Bright Blue Red/Yellow/ Green * please refer to the forward voltage in electrical specifications ABOUT THIS SERIES Notice: please note that not all combinations of above numbers are available. • Standard wire length is 200 mm, 22A WG UL1007, red wire denotes Anode (+), black wire denotes...

Abrir o catálogo na página 3

QRM14 series Ø 14 mm rear panel mount LED indicators REAR MOUNT - WIRES TERMINALS - SINGLE & BI-COLOR LED REAR MOUNT - WIRES TERMINALS - TRI-COLOR LED

Abrir o catálogo na página 4