Catálogos >
Borghi Srl >
OperationmanualAIRSEP

OperationmanualAIRSEP
1 / 23Páginas

Adicionar aos Favoritos

Excertos do catálogo

Operation manual AIRSEP

Abrir o catálogo na página 1

Principle of working of AIRSEP

Abrir o catálogo na página 2

1. Base module. 2. Bunker-feeder. 3. Vibration chute. 4. Main fan. 5. Fluid generator. 6. Working chamber. 7. Collector of seed fractions. 8. Turning flaps with fixing elements. a. collector of main fractions b. collector of intermediate fractions O — marketable grain and sowing grain G — feeder grain and waste ■ — besatz and waste

Abrir o catálogo na página 3

Loading, adjusting and turning the AIRSEP

Abrir o catálogo na página 4

Connect the separator on to the electric network. . Load the grain into the bunker-feeder. Fix the turning flaps in this position.

Abrir o catálogo na página 5

Direction of rotation of generator must correspond to an arrow after main fan switching on. You have to make changing of phase shift if you observe the wrong direction of rotation.

Abrir o catálogo na página 8

Crack open the shutter providing minimal feeding of an initial material.

Abrir o catálogo na página 10

This is the shutter of initial material feeding.

Abrir o catálogo na página 11

In separated chamber fix an optimum pressure by means of power regulator of the air jet generator.

Abrir o catálogo na página 12

The optimum air pressure in separated chamber is a feature of equal distribution of the initial material from the fifth and the second fractions.

Abrir o catálogo na página 13

After regulation of pressure in separated chamber you can increase a content of the initial material through opening of shutter. You have to control the quality of grain in all fractions. Grain has to correspond to your demands.

Abrir o catálogo na página 14