MIN-MAX CONTINUOUS AIR INLETS
1 / 7Páginas

MIN-MAX CONTINUOUS AIR INLETS IDEALLY SUITED FOR ALL POULTRY AND LIVESTOCK CONFINEMENT BUILDINGS These rugged panels come in 10’ sections (2’ min, 8’ max split) and lock together with a triple seal to create a continuous inlet. AIM Board series air inlets consist of FRP (UV treated fiberglass) shell injected with 1" of high density, CFC-free polyurethane foam insulation. This superior material offers a 50% higher “R” value than standard 1" styrofoam panels and is much more rigid, creating a tighter seal which makes installation easy. The extruded PVC flexible hinge provides smooth operation and an air-tight bottom seal. Hinge and seal extrusions are fastened to the inlet with stainless steel screws, making field replacement very easy. AIM Board series continuous air inlets are sold individually, but come prebundled in packs of 5. Each AIM inlet board comes with one “H” connector bracket pre-installed. TRIPLE SEAL • • • • • • • Available in 12", 16" widths. Available in white or black FRP shell only, with black extrusion. Lightweight CFC free foam insulation with R8 insulation. Laminated design for strength and durability. FRP panels are UV protected for outdoor use. Continuous flexible extruded hinge prevents cold air leakage . Unique flexible seal keeps air stream tight to the ceiling for maximum “throw” and eliminates air leakage when closed. • Easily cleaned with high pressure wash. BENEFITS OF FRP COATING • FRP coating is higher quality and has a more durable finish. • One product covers both indoor & outdoor use. • Product is more rigid. • Better adhesion to the inner foam insulation. • Overall better product performance. SPLIT BAFFLE HARDWARE NEEDED TO SECURE 2X4 TO SUPPORT BRACKETS DOUBLE INLET SUPPORT BRACKET EYELET WITH STEEL ROD FROM ACTUATOR (IF APPLICABLE) 8" BAFFLE BOARD 2X4 LUMBER DROP CORD WALL DROP CORD ADJUSTER CANARM LTD. - Corporate Office PO Box 367 2157 Parkedale Ave., Brockville, ON Canada K6V 5V6 Tel: (613) 342-5424 Fax: 1-800-263-4598 www.canarm.com Subject to Change without notice. Arthur Manufacturing Facility #7686 Concession 16, RR 4 Arthur, ON Canada N0G 1A0 Tel: (519) 848-3910 Fax: (519) 848-3948 CANARM LTD. - USA Warehouse 808 Commerce Park Drive Ogdensburg, New York, USA 13669 Tel: 1-800-267-4427 Fax: 1-800-263-

CONTINUOUS AIR INLETS AIM BOARD 50% HIGHER “R” VALUE • LIGHTWEIGHT • EASY INSTALLATION IDEALLY SUITED FOR ALL POULTRY AND LIVESTOCK CONFINEMENT BUILDINGS These rugged panels are 8' long and lock together to create a continuous inlet. AIM Board series air inlets consist of FRP (UV treated fiberglass) shell injected with 1" of high density, CFC-free polyurethane foam insulation. This superior material offers a 50% higher “R” value than standard 1" styrofoam panels and is much more rigid, creating a tighter seal which makes installation easy. The extruded PVC flexible hinge provides smooth...

CORROSION PROOF • LOW COST • SOLID PERFORMANCE IDEAL FOR ALL AGRICULTURAL APPLICATIONS The energy free counter balance air inlet is designed to use static pressure created by ventilation fans to open the baffle and allow fresh air into the barn. No pulleys, chains or power units are required. FEATURES • Inlet housing and door manufactured from polyethylene plastic. • Baffle and door insulation are manufactured using rigid CFC-free styrofoam insulation. • Adjustable corrosion proof counter balance slides along on heavy stainless steel wire, and is shrouded with PVC plastic for corrosion...

CORROSION PROOF • ECONOMICAL • DURABLE IDEAL FOR ALL AGRICULTURAL APPLICATIONS These durable ceiling inlets are rotational moulded with high impact polyethylene. They are designed to offer efficient airflow economically with minimum maintenance. The polyethylene is easy to clean with a pressure washer. AVAILABLE INLET STYLES • Mechanically operated (type “-SM") with an actuator. • Energy free models (type “-SCB") that open with static pressure and close with adjustable counter balance weight. Single sided Canarm ceiling inlet. 1500 cfm. Insulated door - Polyurethane injected. Available in...

BACK DRAFT DAMPERS / MOTORIZED BACK DRAFT DAMPERS BACK DRAFT DAMPERS MODELS: 3000 3100 3200 SR: 0.016” - 0.020” roll formed aluminum with vinyl gasket - used with fan motors under 1 HP SE: 0.05” extruded aluminum with vinyl gasket - used with fan motors over 1 HP BLADE  OPTION Positive Seal Damper Blades with Vinyl Gaskets SIDE MOUNT - NO FLANGE Sturdily constructed from all-aluminum extrusions. Maximum 8 square feet per motor. Positive seal keeps leakage less than 1%. Blades are .05” extruded aluminum with vinyl gasket. Double panel available 30” and up. INWARD MOUNT OUTWARD MOUNT...

VENT DOOR ACTUATOR POWERFUL • EASY TO INSTALL • SUITABLE FOR WET LOCATIONS THE FIRST ACTUATOR DESIGNED SPECIFICALLY FOR AGRICULTURAL APPLICATIONS! Includes: • 4 screw eyes • 4 cable clamps • 4 adjustable drop stops • 1 3/32" x 8' stainless steel cable for drop cables DIE CAST ALUMINUM HOUSING FOR MAXIMUM DURABILITY The most economical way of opening your air inlets Built-in anti-rotation device. Ready to mount to the wall (requires 8 lag bolts). Built in potentiometer. Totally sealed unit. Easy to adjust limit switch. Easy access wiring. Suitable for wet locations. cCSAus certified for wet...

BAFFLE ACCESSORIES 08-330-11 - PULLEY WITH S.S. HARNESS 08-130-20 - FLUSH MOUNT PULLEY BRACKET WITH MOUNTING HARDWARE CANARM LTD. - Corporate Office PO Box 367 2157 Parkedale Ave., Brockville, ON Canada K6V 5V6 Tel: (613) 342-5424 Fax: 1-800-263-4598 www.canarm.com Subject to Change without notice. Arthur Manufacturing Facility #7686 Concession 16, RR 4 Arthur, ON Canada N0G 1A0 Tel: (519) 848-3910 Fax: (519) 848-3948 CANARM LTD. - USA Warehouse 808 Commerce Park Drive Ogdensburg, New York, USA 13669 Tel: 1-800-267-4427 Fax: 1-800-263-4598 agsales@canarm.ca Printed in Canada