ON-SITE LOX / LIN GENERATOR GAMMA 1.5 tpd Available in Automated or Manual Operation Portable and self-contained liquid oxygen and liquid nitrogen generating plant built on a 463L pallet, will fit in a C-130 aircraft, can be flown to a forward area, and generate LOX/LIN in under four hours. Value / Description Output* Purity Operation Utility requirement Weight Dimensions 13.1 gph @ 6 psig (LIQUID OXYGEN) 300-1800 scfh | up to 4900 psig (GASEOUS OXYGEN) 18.5 gph @40 psig (LIQUID NITROGEN) 200-1700 scfh | up to 4900 psig (GASEOUS NITROGEN) 99.5% 02/N2 10 day cycles 260 amps, 460 volts, 3-phase, 60 hertz 315 amps, 380 volts, 3-phase, 50 hertz 4535 kg | 10000 lbs (bare plant) Length = 7.3 ft Width = 9 ft Height = 8.5 ft 'Production rate based on ambient conditions of 70°F temperature and 14.7 psia barometric pressure at sea level NOTE: Plant is capable of production at temperatures between 5°F and +113°F System Design PCI’s air separation systems are low pressure process types using the basic "Brayton Cycle” with a nominal system pressure of 140 psig. This low pressure process is inherently more reliable and less dangerous than a high pressure system that typically uses design pressures of 3000 psig or higher. PCI’s oxygen/nitrogen production equipment utilizes proven components, that have been successfully integrated into numerous international commercial and military applications. PRODUCT PROFILE aaooyiRev

System Advantages Purification Process The GAMMA plant features our patented Rapid Pressure Swing Adsorbers (RPSA) technology. This system consists of three adsorption beds that cycle at high speed, one on-stream at pressure and the other two off-stream being regenerated or depressurizing or repressurizing. The bed cycling is controlled by a reliable and simple solid-state programmable logic controller (PLC). PCI’s adsorber system modules are designed to remove moisture and C02 to levels of less than 3 ppm by volume. These minute levels preclude process disruption of these condensibles in...