TA29AC
1 / 7Páginas

Product Segments • Industrial Motion TiMOTION's TA29AC is a linear actuator with an AC/DC power supply integrated into the housing that affords a maximum 4000N force (push/pull). It is controlled by 1 neutral wire and 2 line wires (extension and retraction), making it a powerfully practical means to automate the ventilation system in livestock farming. General Features Max. load Retracted length > 302mm (depending on chosen options) Output Signals Black, grey Operational temperature range

Retracted Length Load and Speed CODE Self Locking Force (N) With Load With Load Motor Speed (5200RPM, Duty Cycle 10%) M Note 1 Please refer to the approved drawing for the final authentic value. 2 The current & speed in table are tested when the actuator is extending under push load. 3 Standard stroke: Min. 25mm, Max. please refer to below table. CODE

Motor Speed (5200RPM) Speed vs. Load 10.0 9.0 8.0 7.0 Speed (mm/s) Performance Data (220V AC Motor)

Rear Attachment (mm) See page 6 3 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 10.2 4 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 12.2 Front Attachment (mm) See page 6 3 = Aluminum, slotless, hole 10.2 4 = Aluminum, slotless, hole 12.2 Direction of Rear Attachment (Counterclockwise) See page 6 Special Functions for Spindle SubAssembly 2 = Standard push only Functions for Limit Switches See page 7 1 = Two switches at full retracted / extended positions to cut current Output Signals See page 7

TA29AC Ordering Key Appendix Retracted Length (mm) 1. Calculate A+B+C+D = Y 2. Retracted length needs to ≥ Stroke+Y 3. Retracted length needs to > 302mm A. C. Special Bunctions for Spindle Sub-Assembly Front Attach. Rear Attach.

TA29AC Ordering Key Appendix Rear Attachment (mm) 3 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 10.2 4 = Aluminum, U clevis, slot 6.2, depth 12.2, hole 12.2 Front Attachment (mm) 3 = Aluminum, slotless, hole 10.2 4 = Aluminum, slotless, hole 12.2 ø12.2 Direction of Rear Attachment (Counterclockwise) 1 = 90°

TA29AC Ordering Key Appendix Wire Definition Without T-Smart Port Number Functions for Wire Color Limit Switches Position Feedback 0. Without Limit switches cut off the acutator Live (EXT+) Live (EXT+) Live (RET+) Live (RET+) Limit switches cut off the acutator V-out (signal) Connector 2 = Tinned leads Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. TiMOTION products are subject to change without prior n