Catálogos >
VOSTERMANS VENTILATION B.V. >
Multifan Fiberglass Cone Fans

Multifan Fiberglass Cone Fans
1 / 4Páginas

Adicionar aos Favoritos

Excertos do catálogo

Fiberglass Cone Fans Efficient ventilation with high air yields

Abrir o catálogo na página 1

Efficient ventilation with high air yields Thanks to their aerodynamic design, Multifan Fiberglass Cone Fans are among the most energy-efficient fans available worldwide. On top of that, they are resistant to some of the most aggressive climates, thanks to the use of high-tech engineering plastic parts. This makes the Fiberglass Cone Fan the cream of the crop in many respects. This type of fan is often used in large buildings, such as pig, poultry and dairy barns, to efficiently refresh the air. These fans can also be used in combination with light traps or air filters. The 130 and 140 cm...

Abrir o catálogo na página 2

Technical data single-phase Vplus technology Vplus technology Direct Drive * Minimum Fan center on center spacing This is a small selection from our extensive range. For other product configurations, please contact our customer support team. Accessories can influence the performances. The displayed data is based on an aluminum shutter. Transformer Voltage Control (T), Frequency Control (F), Electronic / Triac / Solid State Voltage Control (E).

Abrir o catálogo na página 3

Energy-efficient axial fans Our standard fans are also available in extra an energy-efficient variant. With the help of the MFD frequency controller, it is possible to lower the speed of these fans on a continuous scale. For every 20% reduction in speed, the fan’s energy consumption is halved. To provide optimum protection for the sensitive electronics inside a controller, the fan is placed in a separate housing with at least IP65 protection class. This is essential to safeguard reliability in even the most extreme environments. Our ECplus and Vplus technologies (with permanent magnet...

Abrir o catálogo na página 4